Can KT200 Read PSA DCM6.2A, OBD or Boot Mode?

One customer wondered if KT200 Programmer can read/ write PSA DCM6.2A in bank? Or can only do it in OBD

Answer:

On Bench/ OBD on Bench/ Jtag BDM.

 

Method 1.On Bench

PIN2&3&52 – +12V

PIN4&5 – GND

PIN33 – CANL

PIN49 – CANH

 

Method 2.OBD on Bench

*This may only read ID but not full flash file because IMMO/ gateway not present blocks read/write instruction, so will only work in vehicle not on bench OBD

Also with VAG UDS via OBD, ECU must get immo clearance to enable write

Method 3.JTAG/ BDM

Solder 2 links on backside.

On front side solder the rainbow flat cable.

Hope this could help!

Whatsapp: +8615576977825
Email: sale@cnautotool.com