autotool.biz

Autel Tools

No Comments in Autel Tools

Autel MaxiIM IM608 VS MaxiIM IM508 VS Auro OtoSys IM600 VS IM100

Autel factory combine Cnautotool.com engineer make a comparison table about Autel MaxiIM IM608 VS Autel MaxiIM IM508 VS Auro OtoSys IM600 VS Auro OtoSys IM100.

They can compare with each other in the aspects of IMMO (key programming, key learning, pin code read etc.), programming, OE-Level diagnosis, Advanced Service Functions, configurations etc.

Product Autel MaxiIM IM508 Autel MaxiIM IM608 Auro OtoSys IM100 Auro OtoSys IM600
Image  Autel-MaxiIM-IM508  Autel-MaxiIM-IM608  AuroOtoSys-IM100  AuroOtoSys-IM600
IMMO
Smart Mode (Guided and Automated Key Learning Function)
Expert Mode (Advanced key Learning)
Auto Detect Make/Model/Year/System
Read PIN/CS
Read PIN/CS (All Keys Lost)
Key Generation
Key Learning
IMMO ECU Reset/Adaption
IMMO ECU Refresh/Coding
Remote Learning
Backup /Restore IMMO Data
AUDI Q5/A4/A5 2015-2017 Read PIN/CS N/A
BMW FEM/BDC Key Learning and Adaption
Mercedes Key Learning ×
Benz 3rd Generation IMMO Add key, all key lost, key Learning N/A
BMW FEM/BDC Key Learning and ECU adaptation
BMW CAS4/3/2 key learning CAS4 available when connected to XP400
VW /Audi MQB (VDO & JCI) add key, IMMO V A4/A5/Q5 2015+ Key learning N/A
VW /Audi /Skoda / Seat IMMO III /IV /V add key, all key lost
Programming
Key read /write
EEPROM Read/Write
MCU Read/Write Basic Advanced Basic Advanced
ECU Read/Write When connected to XP400
MC9S12 Encryption Chip read/write When connected to XP400
IC Card Read/Write When connected to XP400 N/A
Mercedes Infrared Key Read/Write When connected to XP400 N/A
Remote Frequency Detect When connected to XP400 N/A
Support PC When connected to XP400
OE-Level Diagnostics
All Systems for Over 80 Makes and Models N/A
AutoVIN /Auto scan
Read /Erase codes
View, record, playback live data
View Freeze Frame data
Shop and data Manager applications
MaxiFlash JVCI ECU Reprogrammer (Bluetooth /USB cable) N/A
OtoFlash (J2534 ECU Reprogrammer) N/A
Advanced Service Functions
Oil Serive Reset
Parking Brake Pad Relearn After Replacement
Steering Angle Sensor Relearn
Battery Registration and Reset
Diesel Particulate Filter Regeneration
Tire Pressure Monitoring System Sensor ID Relearn
ECU Coding N/A N/A
VW/Audi Component Protection N/A
Complete Service Functions N/A N/A
Tool Features
Built-in Rechargeable Li-ion Battery 5000 mAh 15000 mAh 5000 mAh 15000 mAh
Internet Updatable Wi-Fi Wi-Fi Wi-Fi Wi-Fi
Multilingual Support
One Year Warranty
Free Online Update Two Years
Touchscreen 7-inch 10.1-inch 7-inch 10.1-inch
Memory 32 GB 64 GB 32 GB 64 GB
Processor Cortex-A9 processor Cortex A7+A15 six-core processor Quad-core processor Hexa-core processor
Camera N/A 8.0 Megapixel N/A 8.0 Megapixel
Resolution 1024×600 1920×1200 1024×600 1920×1200
Note: XP400 can be purchased separately. 
Some listed functions are manufacture dependent. Constantly update MaxiIM for current vehicle coverage. Update software regularly for most accurate tool features. 
No Comments in Autel Tools

How To Register Autel MaxiDiag MD808/MD808 Pro?

As we all know , all autel scanners need to register first , then you could download software, update online, retrieve information and get warranty service . We have customers who dont know how to register autel MaxiDiag MD808 ( or MD808 Pro ) , please check all details as bellow :

Notice : Before registration , please confirm your network is working properly .

Registration Steps :

1. Visit the website http://pro.autel.com.

2. If you already have an Autel account, Sign In with your account ID and password.

3. If you are a new member to Autel, click on the Create Autel ID button on the left side to create an ID.

4. Enter the required information in the input fields, and click the Get Verification Code button to get a verification code for email validation.

5. The online system will automatically send a verification code to the registered email address. Input the code in the Verification Code field and complete other required fields. Read through Autels Terms and Conditions and click on Agree, and then click Create Autel ID at the bottom. A product registration screen will display.

6. The devices serial number and password is located in the About section of the System Setup application on the tool.

7. Select your product model, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.

After registration finished , you can use your tool now .

Any more help , welcome to contact us directly : sale@cnautotool.com

www.cnautotool.com

 

No Comments in Autel Tools

How to Change the language for Autel maxisys MS906/MS906BT/MS906TS/MS90P/elite Diagnostic Tools

Usually our Autel Maxisys Scanners in Spanish language in default , if you want change it to English , please pay attention :  

1. It need you change the diagnostic system (Autel maxisys MS906/MS906BT/MS906TS/MS90P/elite) change to English from Spanish language first .

2. At the same time , you need change the Andriod operation system language from Spanish to English

So how to change the language ? Lets check the steps as bellow :

1. Change the diagnostic system language

Change the language from Spanish to English.

Step 1: Turn on the machine to the diagnostic system

Step 2: Click at “Settings” like the picture

Step 3: Click at “ Language”

Step 4: Select “ English”

Then you can see that the language is in English now.

 

2. Change the Andriod operation system language

To change the language from Spanish to English.

Step 1 : Click this icon   , enter into Andriod operation system

Step 2 : Click the setting icon 

Step 3 : Click language setting 

Step 4 : Click language  

Step 5 : Select English  , then the Andriod system language change to English

After getting authorization for new language, pls restart the tool, connect to wifi, go to Update page to re-install all the software, then you will be able to get the software in the new language.

 

 

No Comments in Autel Tools

Autel MaxiSYS Pro MS908P Register, Install and Update

Autel - MaxiSYS - Pro - MS908P - Register - Install - and - Update
How to install Autel Maxisys Pro MS908P software?

There are two Setup.exe program packages contained in the CD provided with the MaxiSys tool kit. The packages include the following applications:

1. PC Link?—?launches a Printing Services program which receives and
allows editing the files sent from the MaxiSys tablet for printing

2. Driver Program?—?setup driver program for the VCI device

3. Network Configuration Program and Update Agent?—?network configuration program and firmware update agent for the VCI device (for J2534 ECU programming device)

4. Update Agent?—?firmware update agent for the VCI device (for Bluetooth communication interface)

To install the Setup.exe program

1. Insert the CD into the CD-ROM of the computer. The driver installation wizard will load momentarily. 2. Click on Next on the welcome page. 3. Click the Change button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.

4. Click Install and the Setup.exe program will be installed onto the computer.

How to register Autel MaxiSYS MS908P pro programmer?

In order to get access to the Support platform and obtain update and other services from Autel, you are required to register the MaxiSys Diagnostic Device the first time you use it.

To register the diagnostic device 1. Visit the website: http://pro.auteltech.com. 2. On the Sign In page, input your account ID and other information to log in, if you already have an account. 3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side. 4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create Autel ID at the bottom to continue. 5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens. 6. Find out the device’s serial number and password from the About section of the Settings application on the MaxiSys Display Tablet.

7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.

How to update Autel MaxiSYS Pro MS908P diagnostic scanner?

1) To update the software
Each car model software has different version. We provide free update online for One Year, pls feel free to contact us by email:  Sale@cnautotool.com

2) To update the firmware
The internal programming of the Autel MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database. The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any updates that are found can be downloaded and installed on the device.

1. Power up the MaxiSys Display Tablet, and ensure that it is connected to a power source and with steady internet connection. 2. Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays. 3. Check all available updates: If you decide to update all the items, tap the Update All button. If you only want to update some individual items, tap the Update button on the right column of the specific item. 4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.

5. When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if there is one.

No Comments in Autel Tools

FAQ Autel MaxiSys Elite Diagnostic Tool with J2534

Q:  What is the difference between Autel MaxiSYS Elite and maxisys pro?

A: MaxiSys elite comes with upgraded Hardware, Docking station, Better resolution screen, overall quicker unit..

The elite model offers more features than the pro version.

You can check detail Autel automotive scanners comparison table below:

autel-maxisys-elite-scanner

Q: It is original? Do you have warranty?

A:One year quality insurance. you can contact us at any time.

Q:  How about coding keys?

A:Yes, Maxisys elite can do key coding.This is the most advanced tool in automotive market.

Q: Does it come preregistred?

A: No, you should register it with your own ID and password. It only takes a few minutes, very easy to do it.

Q:

HOW MANY FREE UPDATES COME WITH PURCHASE OF MAXISYS ELITE.

WHAT WILL HAPPEN IF I DO NOT UPDATE IT,OR IF I WANT TO UPDATE IT AFTER A YEAR OR TWO

A:It comes with one year free update. And you can still use it if you do not wanna to upgrade it.

Q:

Which J2534 ECU Programmer the Pro or the Elite?

A: The J2534 programmer for the Pro and the Elite have no function difference. There are 2 versions of the MaxiFlash Pro. The original unit has an antenna and new unit (MaxiFlash Elite) is smaller without the antenna.

No Comments in Autel Tools

How to submit Data Logging reports in Autel Maxisys MS908P Diagnostics

To submit Data Logging reports in Autel Maxisys Diagnostics:
1. Tap the Diagnostics application button from the MaxiSys Job Menu.
The Data Logging button on the diagnostic toolbar is available throughout the whole Diagnostics operations.
autel-maxisys-pro-data-logging
2. Tap the Data Logging button. The button displays blue during the active recording process.
3. Tap the Data Logging button again to finish recording. A submission form will display to let you fill in the report information.
4. Tap the Send button to submit the report form via the internet, a confirmation message displays when sending is successful

No Comments in Autel Tools

Solution for Autel MS908P Authorization Check Failed Error Code 3

This is the solution of “Authorization Check Failed” with fault 3 on Autel Maxisys Pro MS908P Diagnostic system.

Error Message:

Authorization Check Failed!
Error Code 3

Error-Code

Causes:

If you changed language, you can get this error

How to solve MS908P Authorization problem:

connect to the internet
log in PC Suit upgrade tool on networked computers
Obtain authorization automatically
If this serial number to determine the corresponding Autel ID, you can contact technical support queries.

Hope this helps those autel MS908P users!

No Comments in Autel Tools

Range Rover TPMS Module and Autel TPMS Sensors

Background:

The car has a tire pressure monitoring system (TPMS) and 5 sensors (4 wheels + spare). In October, messages about pressure testing in all tires began to appear on the dashboard with the indicator on fire, then these messages disappeared and the indicator went out. Reading errors through SDD did not give a result (no errors). The system is extremely simple 4 antennas and 1 unit (located in the rear right sidewall). Having called the antenna to break the short circuit, I found out that everything is fine with them. The block itself remained in question. After conducting a study (a series of tests to check the performance), it turned out that the unit responds to a decrease in pressure in the wheels but forgets these values. After opening the unit, he discovered that he turned green, cleaned it, put it in its place … the module’s working capacity did not return.

autel-tpms-land-rover-1

here is the TPMS module

autel-tpms-land-rover-2 autel-tpms-land-rover-3
front

autel-tpms-land-rover-4

behind

Decided to buy a new module. Winter came to the car set new wheels with new sensors.

autel-tpms-land-rover-5
Autel Universal Tire Pressure Monitoring Sensors
Searching on the Internet and buy a module 5WK4 7594 ( NNW502305 )
autel-tpms-land-rover-6
replacement (new unit at the top)
Changed new module in places, diagnosed using SDD (read module, initialized new unit). When the unit was initialized, the program asked either to enter the 8-digit codes of all 5 wheels or drive for 15 minutes and then install the spare wheel instead of standing on the car. For me it seemed difficult, so I started the auto display, there are no messages, I was glad and went home. After 15 minutes of movement, a system failure message popped up, after reading the errors, found that there was no response from all 4 new AUTEL MX-sensors. It turns out the sensors are sold asleep and are programmed for a specific make model and year of the car at atmospheric pressure (if installed on the car, it should be lowered). It is necessary to find a person with a device for programming or buy a Autel MaxiTPMS pad to program by yourself.
autel-tpms-land-rover-7
LF
autel-tpms-land-rover-8
RF
autel-tpms-land-rover-9
RR
autel-tpms-land-rover-10
LR
autel-tpms-land-rover-11
spare wheel

and dropping an error module TPMS went home with the confidence that I would have to plug in a computer and prescribe sensor numbers manually, since I did not want to engage in shamanism with a spare wheel. BUT … a miracle happened and the system picked up all the sensors and after 40 minutes the system did not fail. Now on the tidy does not annoy me amber flat tire icon.

No Comments in Autel Tools

Original AUTEL MaxiSYS Pro MS908P MS908S PRO Diagnostic System with J2534 Reprogramming WiFi

Autel MaxiSys pro MS908P is an evolutionary smart solution for specialized automotive diagnosis and ECU programming. Designed with the DNA of Autel’s diagnostics family, the MaxiSys is built to offer many of the prestigious qualities of the MaxiDAS DS708 with extreme ease of use and powerful diagnostic performance.

Autel MaxiSys Pro Description

The MS908 PRO has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis.MaxiSYS Pro utilizes an ultra-powerful A9 quad-core, 1.40GHz processor that offers a 50% increase in speed versus competing products, a 9.7” LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State hard drive, the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage.

The MaxiSYS Pro includes the J-2534 reprogramming box and special MaxiSYS? Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.

The MaxiSYS Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

Autel MaxiSys Pro Hardware
* Extraordinarily powerful Cortex-A9 quad-core processor
* 9.7” 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology
* Internal reliable and fast 32GB Solid State Drive for better performance
* Built-in 5-megapixel rear camera with autofocus and flashlight
* Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
* Unique shop tough ergonomic design features strong rubber protection and housing;
* Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
* USB, audio and auxiliary ports make it easy to connect accessories
* The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth
Cnautotool.com Autel MaxiSys Pro Software

* Open source Android Operating System for fast boot-up and multitasking
* Easy and intuitive navigation makes finding what you need simple and fast
* Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
* Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
* Displays live data in text, graph and analog for easy data review and analysis
* Configure live data display options, set alarms, record, and playback data frames with one touch
* Records and playbacks live data to pinpoint troubles of sensors and components
* Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
* Remote technical support for convenient demonstration, training and increased customer satisfaction
* Prints out recorded data anytime and anywhere with Wi-Fi technology
* Automatic Wi-Fi updates available in new software release

Who Views This Also Viewed:

Autel MaxiDAS DS708 and Maxisys MS908P VS Xtool EZ400
2 Difference with Autel MaxiSYS MS906,MS908P, Maxidas DS708
3 Original Autel MaxiSYS Elite In Stock Now 2699USD With Free Shipping By DHL
4 Autel MaxiSys pro MS908P Highlight
Autel MaxiSys pro MS908P  2

How to register Launch X431 V 8inch Tablet Wifi Bluetooth scanner?

Launch X431 V 8inch Tablet Wifi Bluetooth scanner registration is needed, though it is able to directly use without activation by sending country and language to Launch Company and wait 2 working days. Following the steps as below, it is easy to do.

1-1

During initial use, tap the X-431 V icon on the home screen and you will see some illustrations that guide you through some of important operations of the application. Scroll your screen to left to read it until the “Start Now” page appears. Tap “Start now” to enter the main menu screen.

Launch X431 V 8inch Tablet user registration

Tap “Login” on the upper right corner of the main menu screen:

3-1

If you are a new user, tap “New Registration”.

3-2

Note: To obtain better service, you need to provide real information. Fill in the information in each field (Items with * must be filled). After inputting, tap “Register”, a screen similar to the following will appear as below, input the Serial Number and Activation Code, which can be found in the password envelope.
3-3

3-4

3-5

Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Profile”. Tap “Activate” to finish your registration.

3-6

To download the diagnostic software, tap “Yes”.

Tap “No” to download and install it later.

3-7

Tap “Update” to start downloading. It may take several minutes to finish it, please be patient to wait. To pause downloading, tap “Pause”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically.

If you have registered to be a member, input your name and password, and then tap the “Login” button to enter the main menu screen directly.For information about LAUNCH X431 PRO MINI, please check this link:
www.cnautotool.com