The Autel MaxiIM KM100 key programmer is an advanced key and immobilizer touchscreen tablet capable of smart key creation and IMMO learning via OBD. This 5.5-inch, Android touchscreen tablet with Bluetooth VCI can program the Autel IKEY as a smart key replacement for more than 700 vehicles and offers IMMO programming capability for multiple vehicle brands including BMW, Volkswagen, Toyota, Honda, and General Motors. Additional innovative features include key renewal and Transponder Editing of 20 supported protocols.
How to use the Autel MaxiIM KM100 key programmer:
Autel Smart key Generating Steps:
Connect the Autel MaxiIM KM100 programmer to the internet
Tap universal key
Find your vehicle by selecting region, make, series, and model year
Tap the vehicle appears on the screen
Read the instructions carefully once your vehicle is selected
Place the blank key in the slot at the top of the device
Tap “Generate universal key”
The key generation process may take up to one minute
Once the process is complete, the screen will display a message indicating key generation success
Tap completed, then exit this app and open special function
Tap “Universal key information detection”
It will read and display the keys information on the screen
After the key is generated, use the Autel KM100 to pair the key with the vehicle.
Autel Smart Key Programming Steps:
Preparation: Autel MaxiIM KM100+ one blank key+ one working key In Universal key, tap IMMO after the key has been generated successfully
Tap Hot function>> Add key (guided)
Press ‘Start’ to perform the following function automatically
Step 1: Function initializing
Step 2: Immo system check
Step 3: Read key number
Step 4: Immo security verification
Step 5: original key programming
Step 6: New key programming
Step 7: Key data synchronization
Step 8: Read key number
Follow the on-screen instruction to do.
Take one registered keyless access remote into the vehicle, and remove all other keyless access remotes from the vehicle.
Turn the ignition switch on (Don’t press the foot brake and press the engine start/stop button twice)
The information from the working key was read successfully, click ‘Yes’ to learn the blank key
Take all original keyless access remotes out of the vehicle
Take a new keyless access remote into the vehicle
The new key will be registered almost immediately then to synchronize the info with the vehicle
Turn the ignition on and off a few times
Wait for the ECU to stabilize
Turn the ignition switch on (Don’t press the foot brake and press the engine start/stop button twice)
Confirm if both the keyless access and immobilizer indicator lights turned off
Turn the ignition switch off
The registration is completed. Please turn the ignition switch off
Check all keyless access remotes to ensure each will start the engine, check all keyless access remotes to ensure each will lock and unlock the doors.