autotool.biz

Caterpillar ET

What You Need To Run Caterpillar Electronic Technician

To run your service tool, you will need to meet the following PC Requirements, communication hardware, and cables.

Note: The minimum PC Configurations should not be used as a standard when buying new personal computers to run the CAT Electronic Technician If you have existing equipment that meets these minimum requirements, it will run your service tool.

PC Requirements
Recommended Configurations
* IBM? PC compatible with Pentium IV 2.4 GHz processor
* 1GB RAM
* 1GB available hard disk drive or higher
* File transfer device
* 15 inch XGA Screen (1280×1024)
* Microsoft Windows? 2000 SP4, or XP SP2 operating system
* RS232 port with 16550AF UART or compatible
* Built in pointing device or mouse
* Microsoft Internet Explorer 6.0 or later version Minimum Configurations
* IBM? PC compatible with Pentium IV 1.8 GHZ processor
* 512MB RAM
* 1GB available hard disk drive or higher
* File transfer device
* 14.1 inch XGA screen (800×600)
* Microsoft Windows? 2000 SP3, or XP operating system
* RS232 port with 16550AF UART or compatible
* Built in pointing device or mouse
* Microsoft Internet Explorer 6.0 or later version

Communication Hardware
171-4400 Tool Group – Heavy Duty Diagnostic Caterpillar Communication Adapter II
Note: For additional requirements, see “Setting up Caterpillar Communication Adapter II,” .
OR–
7X1700 Tool Group – Caterpillar Communication Adapter
Note: For additional requirements, see “Setting up Caterpillar Communication Adapter,” section 2.
OR–
MPSI Pro-Link? 9000 (only for On Highway Truck engines and certain commercial applications)
Note: For additional requirements, see “Setting up MPSI Pro-Link 9000,” section 2.

Exceptions
The requirements for Challenger Technician (CT) from CnAutotool.com, M300 Technician (M300), and Hydraulic Excavators B-Series (HEX) are the following:
CT: 1U9100 Cable Assembly – Challenger to PC Adapter cable
M300: 126-7877 Cable Assembly – M300 to PC Adapter cable
HEX: 127-9797 Cable Assembly – HEX to PC Adapter cable

Note: For HEX, in the Communications tab of the Preferences dialog box, select the Communication Adapter option from the Communication Interface Device drop-down list. Then press the “Advanced” pushbutton. Select the 19200 baud rate radio button.Press “OK.”
Note: Engines that do not have a service connector may also require the 140-9442 ATA\CDL T-Adapter.

No Comments in Uncategorized

Cat ET Service Software Deactivation

Instructions for the Deactivation of Cat ET and CAT SIS service software follow the same format.
The examples that are shown in this presentation represent the Cat ET procedure.
Please follow the same process for SIS DVD.

Deactivation – CAT ET
11-1 11-2 11-3 11-4 11-5

Revoke Licenses – Cat ET & SIS DVD
Computers can be lost, smashed, stolen, etc.
Cat ET or SIS DVD Licenses may be Revoked
Revoked Licenses may be REPLACED
Revoked Licenses may be NOT REPLACED

Revoke and Replace License – Cat ET
If a license is Revoked and Replaced, the Total License count in an Order Increases

-> Order XYZ of 10 TOTAL Licenses Exists
5 Licenses are Unassigned and Available
5 Licenses are Assigned
10 total licenses in Order XYZ

-> If one of the 5 Assigned Licenses from CnAutotool.com is Revoked and Replaced
6 Licenses are Unassigned and Available
4 Licenses are Assigned
1 License is REVOKED
11 total licenses in Order XYZ

Revoke and Not Replace License – Cat ET
If a license is Revoked and Not Replaced, the Licen
se count in an Order is Maintained
-> Order XYZ of 10 TOTAL Licenses Exists
5 Licenses are Unassigned and Available
5 Licenses are Assigned
10 total licenses in Order XYZ
-> If one of the 5 Assigned Licenses from Order XYZ is Revoked and Not Replaced
5 Licenses are Unassigned and Available
4 Licenses are Assigned
1 License is REVOKED
10 total licenses in Order XYZ

Revoke License – Cat ET

12-1 12-2

Revoke License

12-3

Revoke & Replace License Results

12-4

Revoke Without Replacement License Results

12-5

No Comments in Auto Scanner Tools

Cat E lectronic Technician (ET)

7-0

Maintain Productivity and Control Cost
Quickly reduce engine and machine downtime, control costs and schedule repairs more efficiently by diagnosing problems using Cat?Electronic Technician (ET).
Cat ET is easy to use. The software accesses information from the electronic control modules on Cat engines and equipment. Using CAT ET, technicians can view status parameters, logged codes, active codes, perform functional tests, and record and view data logs of equipment operation.

7-1
Optimize Profitability
* View active and logged diagnostic codes to quickly identify faulty sensors.
* Review logged event codes to show engine overspeeds, high temperatures, and more.
* Monitor fuel consumption.
* Perform diagnostic tests to quickly identify the root cause of problems.
* Calibrate key components to ensure maximum operating efficiency.
* Use Data Logger to record real-time data.
* View previously recorded data logs to monitor trends in the health of your equipment to ensure peak performance.

Maximize Efficiency
* Search help options to guide every task.
* Retrieve engine data quickly for fuel used, miles traveled, idle time and hours operated.
* Display status of engine speed, throttle position, timing advance, fuel flow and more.
* Check an Diagnostic Tool electronic control module’s configuration and change user settings.

CAT DEALERS DEFINE WORLD- CLASS PRODUCT SUPPORT
We offer you the right parts and service solutions, when and where you need them.
The Caterpillar Electronic Technician network of highly trained experts can help you maximize your equipment investment.

7-2

No Comments in Auto Scanner Tools

Installing Caterpillar Electronic Technician

Purpose
The installation procedure described below is for installing your service tool. The installation program is designed to run under Microsoft Windows 98/NT/2000/ME/XP. The installation requires one Install CD-ROM. This installation process will upgrade your CAT ET and preserve files created such as defined Status Groups or service tool report documents.

Note: The service tool will not run from a server over a network.

Instructions
Perform the following steps to install the service tool from the Install CD-ROM:
Step 1 Close any applications you are running. This includes any connections to mainframe computers or networks. only Windows should be running.

Step 2 Insert Caterpillar Electronic Technician Install CD-ROM into your computer’s CD-ROM drive.

Step 3 Press the “Start” pushbutton on the Task Bar. From the menu, select “Run.” The Run dialog box is displayed.

27-1

Step 4
In the text box type the following:
z:\setup.exe
If the CD is in a CD-ROM drive other than “z,” substitute “z” with the appropriate drive letter.
Step 5 Press “OK.” The “Setup is preparing…” status box is displayed

27-2
This status box shows the percentage status of the InstallShield Wizard setup. When it is finished, the Welcome dialog box is displayed

27-3
Step 6 Read through the welcome message. Press the “Next>” pushbutton to continue the setup. The Software License Agreement dialog box is displayed. Press “Cancel” to abort the setup process.

27-4

Step 7 Read through the license agreement. Press the “I Agree” pushbutton to accept the terms and conditions. The Select Components dialog box is displayed

You must have at least Internet Explorer version 5.5 installed on your PC to run the service tool. If you do not have Internet Explorer on your PC, you must install CAT Electronic Technician. If you have an older version of Internet Explorer on your PC, it may not support the service tool, and you need to update your current version of Internet Explorer. Press “Yes” in the Install Internet Explorer dialog box to begin the installation.

Note:A message box may display asking you to reboot. Rebooting is required before continuing installation.

Upgrade information:
If you are upgrading from a previous version of the service tool, and if your current Automotive Diagnostic Scanner is licensed, the License dialog box is displayed showing the current license number. Write down the license number and keep it in a safe place. Press “OK.” The Select Components to Install dialog box is displayed.

NOTICE: To keep your existing license, always install the service tool in the same folder as the previous installation.

27-5

Step 8
Select the check box corresponding to the components(s) you wish to install.

Browse
To select a path different from the one shown in the Destination Folder area, press the “Browse…” pushbutton. The Choose Folder dialog box will display. In this dialog box, you can change the directory path by selecting the drive and folder that you want to install to by typing the complete path in the Path text box.  Disk Space

To check available hard disk drive space for all available drives, press the “Disk Space…” pushbutton. The Available Disk Space dialog box will display.  Changing the drives in the Available Disk Space dialog box changes the drive your destination folder is pointing to in the Select Components to Install dialog box. Press the “Next>” pushbutton to continue the setup. The Select Languages dialog box is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

27-6

Step 9
Select the check box next to the language(s) you wish to install. Press the “Next>” pushbutton to continue the setup. If more than one language is selected, the Select Default Language dialog box is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.
Select All To select all language check boxes, press the “Select All” pushbutton.
Clear All Pressing the “Clear All” pushbutton clears
all checked languages except English,
which is always checked

27-7

Step 10
Select the radio button corresponding to the default language you want. You can change the language later in the service tool.  Press the “Next>” pushbutton to continue the setup. The Select Program Folder dialog box is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Select the radio button corresponding to the default language you want. You can change the language later in the service tool.Press the “Next>” pushbutton to continue the setup. The Select Program Folder dialog box is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

27-8

Step 11 Caterpillar ET is the default Program Folder name. If you want to change the Program Folder name, select a folder from the Existing Folders text box, or type a folder name in the Program Folders text box.

Press the “Next>” pushbutton to begin copying files. The Setup screen is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Note:
A dialog box displays the question, “Would you like this installation to put the service tool icon on your desktop?” Press “Yes” to place the icon on your desktop, or press “No” if you do not want the icon placed on your desktop. Once the service tool icon is placed on your desktop, this dialog will not display.

Step 12 The setup process begins copying files. Press “Cancel” to abort the setup/install procedure.

When the installation process is successfully completed, the Setup Complete dialog box is displayed. The Setup Complete dialog box varies depending upon whether or not the computer must be restarted to complete the installation or if you need to license your service tool.

When installing the Communication Adapter II, a message box is displayed with important instructions about the Communication Adapter II. Press “OK.”

Warning for service tool user:
If you are installing the service tool on Windows 2000 or XP, a warning box displays suggesting that anyone running Caterpillar Electronic Technician be a member of the “Power User”group. Press “OK.”

27-10

Step 13
If the Setup Complete message box displays the following message: “Some files were locked – Must Reboot to Finish Setup” , then you must restart your computer to complete the setup.

27-11

Note: If you do not install the Comm Adapter II software, the WARNING message does not display in this dialog box.
Select the “Yes, I want to restart…radio button to restart your computer now, or select the No…” radio button to restart your computer later. Press The “Finish”pushbutton to complete the setup. The “<Back” pushbutton is disabled.

Note: If you elect not to reboot at this time, the service tool will not operate correctly.

OR–
If upgrading from a licensed version, the Setup Complete dialog box is displayed with the following message: “Setup can launch the Read Me file and Caterpillar Electronic Technician.”

27-12

Select the appropriate check box depending on whether you want to launch Read Me or start the service tool. Press the “Finish” pushbutton to complete the setup. The “<Back” pushbutton is disabled.
OR–
If the service tool is not already licensed, the Setup Complete dialog box is displayed with the message: “Setup can launch the Read Me file and License Caterpillar Electronic Technician” .

27-13

Select the appropriate check box depending on whether you want to launch Read Me or License Caterpillar Electronic Technician. Press the “Finish” pushbutton to complete the setup. The “<Back” pushbutton is disabled.

Note: See “Licensing Caterpillar Electronic Technician,” section 4,

CAT ET 2017A Caterpillar Electronic Technician Free Download

Caterpillar Electronic Technician 2010 download free:

https://mega.nz/#!UKZyxKjB!hjHElnx8hO1-g6RdvQxKPK6SKaahe2xDvoQYhKjgm5U

incl. 2010A +2010 B +2010 C +2011 A v1.0

Free but YOU ARE TRYING CAT ET 2010 2011 ON YOUR OWN RISK!!

Caterpillar CAT ET 2017A Electronic Technician download:

http://www.cnautotool.com/goods-2485-2017A+Version+CAT+Caterpillar+ET+Diagnostic+Adapter+III.html

It’s CAT electronic technician crack

No need CAT et 2017a keygen

Tested by professionals & 100% works well

Use CAT ET 2017A with relief and safety! Look here:

17-

17-0

17-00

17-000 17-0000
Caterpillar CAT ET 2017A Computer Requirement:

PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Caterpillar CommuniCATion Adapter 3)
USB 1.1 or 2.0 port (for use with Comm Adapter 3 from CnAutotool)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.

Note: The most recent version of Microsoftò Internet Explorer may not be validated to work with the service tool.

No Comments in Auto Scanner Tools

NEW CAT Caterpillar ET Wireless Diagnostic Adapter with Bluetooth

12-1

* Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
* Perform diagnostic tests and calibrations, and calibrate
* Context sensitive help leads operator through every task Cat ET can perform
* Electro-mechanical and electro-hydraulic components
* View ECM??¥s current configuration and change user settings

CAT Electronic Technician Wireless function:
1.Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
2.View ECM??¥s current configuration and change user settings
3.Perform diagnostic tests and calibrations, and calibrate
4.Electro-mechanical and electro-hydraulic components
5.Context sensitive help leads operator through every task Cat ET can perform
6.Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability. Functionalities Shows all operating conditions that cause high repair costs such as: Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator Cat “ET Trainer” is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of ET Caterpillar.

Specification:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Showswhen problem occurred and how often it happened.
7.Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubeshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the “How To” around the software

12-2
12-3

Free Download CAT ET 2017A Caterpillar Electronic Technician

Caterpillar Electronic Technician catalog download:

Caterpillar Electronic Technician 2010 download free:

https://mega.nz/#!UKZyxKjB!hjHElnx8hO1-g6RdvQxKPK6SKaahe2xDvoQYhKjgm5U

incl. 2010A +2010 B +2010 C +2011 A v1.0

Free but YOU ARE TRYING CAT ET 2010 2011 ON YOUR OWN RISK!!

Caterpillar CAT ET 2017A Electronic Technician download:

http://www.cnautotool.com/goods-2485-2017A+Version+CAT+Caterpillar+ET+Diagnostic+Adapter+III.html

It’s CAT electronic technician crack
No need CAT et 2017a keygen
Tested by professionals & 100% works well

Use CAT ET 2017A with relief and safety! Look here:

2-1
2-2 2-3 2-4 2-5

Caterpillar CAT ET 2017A Electronic Technician Computer Requirement:
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.

Note: The most recent version of Microsoftò Internet Explorer may not be validated to work with the service tool.

What is CAT ET 2017A?

CAT ET (Caterpillar Electronic Technician) 2017A is an updated version of the dealer level program for the diagnosis of all equipment Caterpillar.
This program works with the dealer diagnostic scanner Caterpillar Communication Adapter, as well as other adapters for diagnostics including scanner Nexiq; the program provides the full information when troubleshooting.
Caterpillar ET diagnostic program for the entire technology Caterplillar. This program works with the dealer diagnostic scanner Caterplillar Communication Adapter. Software Caterpillar ET is necessary for firms involved in the diagnosis of building and special machinery Caterpillar. Caterpillar ET allows you to work with the diagnostic adapter and provides complete information for troubleshooting.

What’s New – Caterpillar ET 2017A?

Communications Adapter 3 (CA3) Update
The service tool contains a new version of the Communications Adapter 3 (CA3) software. The new software allows flashing at 500 kilobits on supported applications.

Marine Sea Trial Changes
In the marine Sea Trial Steady State feature, the 9xx manual entry parameters have been updated. Some numbers have been removed, and some existing numbers have new descriptions. New figures have been added with new 900 number designations for current engines, including Tier 4 SCR based after treatment engines. The steady-state setup files names and content have changed, and are based on the engine cooling system. The Sea Trial Feature is now supported on marine fixed speed engines.

Caterpillar Electronic Technician manual:

Part 1: How to install Perform the following steps to install the service tool from the Install

CD-ROM:

Step 1 Close any applications you are running. This includes any connections to mainframe computers or networks.Only Windows should be running.

Note: If you are running Windows NT, Windows 2000, or Windows XP, you must have administrative rights on your computer system to install the service tool.

Step 2 Insert Caterpillar Electronic Technician Install CD-ROM into your computer’s CD-ROM drive.

Step 3 Press the “Start” pushbutton on the Task Bar. From the menu, select “Run.” The Run dialog box is displayed

2-6

Step 4 In the text box type the following:
z:\setup.exe
If the CD is in a CD-ROM drive other than “z,” substitute “z” with the appropriate drive letter.

Step 5 Press “OK.” The “Setup is preparing…” status box is Displayed

2-7

This status box shows the percentage status of the InstallShield Wizard setup. When it is finished, the Welcome dialog box is displayed

2-8

Step 6 Read through the welcome message. Press the “Next>” pushbutton to continue the setup. The Software License Agreement dialog box is displayed. Press “Cancel” to abort the setup process.

2-9

Step 7 Read through the license agreement. Press the “I Agree” pushbutton to accept the terms and conditions. The Select Components dialog box is displayed Press “<Back” to return to the previous screen. Press “I Decline” to abort the setup process.

Internet Explorer information:

You must have at least Internet Explorer version 5.5 installed on your PC to run the service tool. If you do not have Internet Explorer on your PC, you must install it. If you have an older version of Internet Explorer on your PC, it may not support the service tool, and you need to update your current version of Internet Explorer. Press “Yes” in the Install Internet Explorer dialog box to begin the installation.

Note: A message box may display asking you to reboot. Rebooting is required before continuing installation.

Upgrade information: If you are upgrading from a previous version of the service tool, and if your current service tool is licensed, the License dialog box is displayed showing the current license number. Write down the license number and keep it in a safe place. Press “OK.” The Select Components to Install dialog box is displayed.

Service Tool Serial Number___________________________

NOTICE: To keep your existing license, always install the service tool in the same folder as the previous installation.

2-10

Step 8 Select the check box corresponding to the components(s) you wish to install.

Browse

To select a path different from the one shown in the Destination Folder area, press the “Browse…” pushbutton. The Choose Folder dialog box will display. In this dialog box, you can change the directory path by selecting the drive and folder that you want to install to by typing the complete path in the Path text box.

Disk Space

To check available hard disk drive space for all available drives, press the “Disk Space…” pushbutton. The Available Disk Space dialog box will display.

Changing the drives in the Available Disk Space dialog box changes the drive your destination folder is pointing to in the Select Components to Install dialog box. Press the “Next>” pushbutton to continue the setup. The Select Languages dialog box is displayed

2-11

Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Step 9 Select the check box next to the language(s) you wish to install. Press the “Next>” pushbutton to continue the setup. If more than one language is selected, the Select Default Language dialog box is displayed

2-12

Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Select All

To select all language check boxes, press the “Select All” pushbutton.

Clear All

Pressing the “Clear All” pushbutton clears all checked languages except English, which is always checked.

Step 10 Select the radio button corresponding to the default language you want. You can change the language later in the service tool.

Press the “Next>” pushbutton to continue the setup. The Select Program Folder dialog box is displayed.

2-13

Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Step 11 CAT Caterpillar ET is the default Program Folder name. If you want to change the Program Folder name, select a folder from the Existing Folders text box, or type a folder name in the Program Folders text box.

Press the “Next>” pushbutton to begin copying files. The Setup screen is displayed. Press “<Back” to return to the previous screen. Press “Cancel” to abort the setup process.

Note: A dialog box displays the question, “Would you like this installation to put the service tool icon on your desktop?” Press “Yes” to place the icon on your desktop, or press “No” if you do not want the icon placed on your desktop. Once the service tool icon is placed on your desktop, this dialog will not display.

Step 12 The setup process begins copying files. Press “Cancel” to abort the setup/install procedure.

When the installation process is successfully completed, the Setup Complete dialog box is displayed. The Setup Complete dialog box varies depending upon whether or not the computer must be restarted to complete the installation or if you need to license your service tool.

Communication Adapter II information:

When installing the Communication Adapter II, a message box is displayed with important instructions about the Communication Adapter II. Press “OK.

Warning for service tool user:

If you are installing the service tool on Windows 2000 or XP, a warning box displays suggesting that anyone running Caterpillar Electronic Technician be a member of the “Power User” group. Press “OK.”

2-14

Step 13 If the Setup Complete message box displays the following message: “Some files were locked – Must Reboot to Finish Setup”

2-15

then you must restart your computer to complete the setup.

Note: If you do not install the Comm Adapter II software, the WARNING message does not display in this dialog box.

Select the “Yes, I want to restart…” radio button to restart your computer now, or select the “No…” radio button to restart your computer later. Press the “Finish” pushbutton to complete the setup. The “<Back” pushbutton is disabled.

Note: If you elect not to reboot at this time, the Heavy Duty Diagnostic tool will not operate correctly

OR–

If upgrading from a licensed version, the Setup Complete dialog box is displayed with the following message: “Setup can launch the Read Me file and Caterpillar Electronic Technician.”

2-16

Select the appropriate check box depending on whether you want to launch Read Me or start the service tool. Press the “Finish” pushbutton to complete the setup. The “<Back” pushbutton is disabled.

OR–

If the service tool is not already licensed, the Setup Complete dialog box is displayed with the message: “Setup can launch the Read Me file and License Caterpillar Electronic Technician”

2-17

Select the appropriate check box depending on whether you want to launch Read Me or License Caterpillar Electronic Technician. Press the “Finish” pushbutton to complete the setup. The “<Back” pushbutton is disabled.

Part 2: How to Configure Electronic Technician to use the Communication Adapter II

In order for Electronic Technician to work with the Communication Adapter II, you must change the Settings to select the Communication Adapter II as your Communication Interface Device:

Step 1 Start Caterpillar Electronic Technician

Step 2 Press the “Stop Connect” button when it appears

Step 3 Select the “Settings” menu (or the “Utilities” menu with ET 2001A or later)

Step 4 Choose “Preferences…”

Step 5 Select the “Communications” tab

Step 6 Change the Communication Interface Device to SIP

Step 7 “COM1” should be selected. This application firmware only supports Serial communications.

Part 3: Ready to use CAT Electronic Technician 2017A V1.0 FROM CnAutotool

View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
In details…

CAT ET Adapter III FAQ

 

 

3-1

 

CAT ET Adapter III FAQ:

Q1 :Is the Cat Comm III compatable with the software CAT caterpillar ET 2011B Is this an actual caterpillar part or a knock off? Thanks
A1: Yes, this is actually the genuine CAT adapter,It is also the ONLY recommended adapter for CAT ET, but obviously other ones will work. It will work fine for the version you have, and 2011C is actually the newest version.

Q2:What is the difference between a cat comm II &amp; Cat Comm III. Is one just a usb connection and one serial? Also, will this unit work with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks
A2:CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines — Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Q3: Does this work with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.
A3: If those programs use auto diagnostic tools suppliers CAT Electronic Technician (CAT ET) for the software, it will work.

Q4: Can the cat communicate3 also be used to read detroit and cummins engines if I have the correct software?
A4:Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

Q5:will this unit allow me all access to the ecm to alter all areas eg set speed limiter to a lower speed and is there a yearly lic fee.
A5: This device is what you should use if you will be hooking up to both off-highway &amp; on-highway CAT engines. If you are strictly wanting to work on on-highway CAT engines, I would rather see you purchase a Nexiq USB Link .The Nexiq USB Link is universal (Works with CAT, Cummins, Detroit, Allison, etc…), it is cheaper, plus it has bluetooth so you can go wireless.

Q6: want to compare the communicator and some caterpillar ECMS could tell me if it works with them.
A6: This item works with all CAT ECMS — Off Road and On Highway, trucks and equipment

if you have any suggestions about cat et diagnostic adapter iii, please leave us message or visit our website and contact us: www.cnautotool.com

Cat ET is the software based service tool

Feline ET may be the program primarily based provider tool which usually increases the provider technical assistant your potential in order to talk and use your digital camera equipment upon auto diagnostic tools suppliers Caterpillar merchandise. I’d seen in advance of of which you’ll find couple of Car Diagnostic Tools ET edition, purchaser and dealer. The item seems as if the following FELINE ET analysis tool is definitely extra tend to your dealer. But I think the following FELINE analysis tool is good for both purchaser and dealer.

We liked the status filter allows your taking a look at associated with serious period variables by either by using a predefined team or perhaps creating a personalized team. That will help dealer identify troubles without having touring equipment. I could carry out most analysis and calibrations by using CAT Caterpillar ET. It’ll possibly not let you expensive ecm’s.

Functionalities indicate most working circumstances of which lead to substantial restore charges including: about connections, substantial temperature, energy use, transmission change counts. This may supply knowledge in order to adjust operator.

Your analysis program bundle necessary is definitely the Caterpillar Digital camera Technical assistant, often called Caterpillar Diagnostic Tool. The following program communicates when using the engine and will get back information and facts relating to miles about the engine, amount of energy made use of and other major facts. Laptop computer program may also be valuable to get calibrating your engine.

The Difference between Oiginal Factory CAT Caterpillar ET Diagnostic Adapter III Scanner and OEM Cat Caterpillar ET Diagnostic Adapter

As we all known the OBD2 Scanner cat caterpillar ET Truck scanner can support for heavy duty trucks and can support Bulldozer, Wheel Loader, Excavator, Dump Truck,

Grader these truck, but not all the truck scan support according to the car type and the year of car, now we sell both the original factory cat

CAT Caterpillar ET Diagnostic Tool and OEM cat caterpillar ET diagnostic adapter III,you can check with our store about the Cat Caterpillar scanner.

the difference between the Auto Scanner Tools caterpillar ET diagnostic Adapter III the main cable is the big different, the original factory Cat Caterpillar the cable is

the COM port cable, and the OEM cat caterpillar Adapter III the cable is USB port cable. the belows photo are the two kind of cable for the Cat

Caterpillar ET Diagnostic Adapter III:
1-1
1-2