Mini ACDP with BMW FEM/BDC module can support FEM/BDC IMMO key programming by ICP or OBP mode. Compared with the traditional wiring mode, what’s the difference between them?
Method 1: FEM/BDC programming by other devices via soldering
When use this method, it needs 2 times to disassemble and solder the 95128/95256 chip of FEM/BDC to read and write data.
Disadvantages:
1.Soldering wire is needed, the operation is complicated and the time is long.
2.95128/95256 memory chip of FEM/BDC needs to be dismantled and welded twice, and there is a risk of module damage.
3.Manual welding reading and writing data is not reliable, once virtual welding, there is a risk of data loss.
Method 2: FEM/BDC programming by Yanhua Mini ACDP key programmer without soldering
Tools need:
ACDP basic version + Yanhua BMW FEM/BDC module (module 2) + ACDP Puncture Socket
Wiring diagram:
Newest BMW FEM/BDC module
New Yanhua Mini ACDP puncture socket
Advantages:
1.It’s easier and more effective to use by professional ACDP puncture socket instead of the traditional welding mode.
2.No need soldering! No need to dismantle 95128/95256 memory chip of FEM/BDC to read and write data! No risk to damage BMW IMMO.
3.Pin intelligent detection. It’s more safe and reliable to read and write data.
Hope it helps!