autotool.biz

Month: April 2019

Xtool A80 Opel diagnosis function list V9.50

Xtool A80 is a decent Opel diagnostic & service reset tool after Opcom interface. It has a wide coverage for Opel cars from 1997 to 2014 year, it has the capabilities of OBD2 diagnosis and special functions.

Xtool A80 looks good from outside:

list - V9.50 -1

Xtool A80 parameters (Claimed):

CPU: RK3288

RAM: 2G

ROM: 32G

Display: 8 inch

Resolution: 1024*768P (4:3)

Battery Capacity: 10,000mAh

Operation System: Android

Camera: 8.0 Megapixel, AF with flashlight

Communication: WiFi / BT

Ports: USB3.0, HDMI (C Type), DC (2.5), VGA (DB15)

Xtool A80 Opel diagnostic functions:

Free download: Xtool A80 Opel diagnosis function list V9.50 (.pdf file)

list - V9.50 -2

ECU Info…Confirmed

Read Codes…Confirmed

Erase Codes …Confirmed

Live Data…Confirmed

Actuators…Confirmed

list - V9.50 -3 list - V9.50 -4

Xtool A80 Opel Special functions:

Special functions…Confirmed (Page 63 – Page 69)

list - V9.50 -5

Xtool A80 Opel Coverage:

Year: 1997 -2014

Models like:

Adam 2014

Ampera 2014

Antara 2014

Astra-J  2014

Cascada 2014

Combo-D 2014

Insignia 2014

Meriva-B 2014

Mokka 2014

Zafira-C

Corsa-D

Agila

Combo

Movano

Vectra-C/Signum

Corsa-C

Speedster/VX220

Vivaro

Zafira

Astra-F

Frontera

Frontera-B

Vauxhall VXR8

Vectra-B

Astra-F

Astra-G

Astra-G(GMSA)

Calibra

Corsa-B

Tigra

Sintra

Omega-B

Monterey

Xtool A80 Opel diagnostic tool language:

English as default.

XTOOL A80 activation for using newest Opel diagnostic software:

In order not to affect the using and upgrading of newly released Opel diagnostic software, please be sure to activate Xtool A80.

Guide:

list - V9.50 -6

First turn on the A80 BT host, enter the tablet setting function to

enable the WLAN function, and connect to the wireless network. Click

the A80 BT Diagnostics icon to activate the page: 1. Enter the activation

code on the certificate.

Enter the six digits after the S/N code on the

certificate

Enter a user name, such as A repair shop.

4, please enter the correct format of the mailbox account.

5 and 6, please enter a consistent custom password in the two columns. After clicking the activation, you will be prompted to verify the mobile number. Please enter the mobile number, receive the SMS verification code, and enter the verification code in A80 BT.

Note: In order to improve A80 BT, every time period, Xtool will update A80 BT, pop up the update box directly on the diagnosis interface, click to install.

Xtool A80 Opel diagnostic tool update:

one-click update: A80 BT device no longer requires a card to be upgraded, just open the app and click Upgrade, as shown in the following figure.
list - V9.50 -7

Certainly, Xtool A80 is not only for Opel diagnosis, but more.

Lonsdor K518 reads PIN for older Fiat 2005-2012: Confirmed!

Question for Lonsdor K518:

When You are planning to add PIN read for older Fiat ??

(Doblo 2005 – 2009 or Ducato 2006 – 2012 etc. )

Answer by obdii365.com:

Easy.

The steps:

Read dump with FVDI

Then VVDI-Prog can calculate PIN from dump

(Tango doesn’t show pin, and you need pin for remote programming)

Then continue with Lonsdor – Immo learn + remote

The test on Doblo:

lonsdor-k518ise-older-fiat-read-pin-1

Select a model:

Fiat- Europe-Doblo-2009-
lonsdor-k518ise-older-fiat-read-pin-2 lonsdor-k518ise-older-fiat-read-pin-3 lonsdor-k518ise-older-fiat-read-pin-4

Lonsdor reads PIN codes

lonsdor-k518ise-older-fiat-read-pin-6

The function can read PIN code and save data

lonsdor-k518ise-older-fiat-read-pin-7

Pls use a working key to turn ignition ON

For a smart key, pls put it close to induction coil

lonsdor-k518ise-older-fiat-read-pin-8

Open the ignition switch

lonsdor-k518ise-older-fiat-read-pin-9

K518 manages to read PIN codes

PIN is saved

Pls use [program key] function to program a key

lonsdor-k518ise-older-fiat-read-pin-10

Done!

Nissan Consult 3 Plus Program Keyless Remote (T31/C11/K12)

This article show a guide on how to use Nissan Consult 3 Plus to program keyless remote (T31/C11/K12).Hope it helps,and if you want to know more about Nissan Consult 3 Plus,check:Nissan Consult 3 Plus Projects.

Related Contents:

Nissan Consult 3 Plus Software Download

How to Install Nissan Consult 3 III Plus Diagnostic Software

Nissan Consult 3 Plus Clone Interface

Procedures:

1.From the CONSULT-III plus “All DTC” screen, select the “BCM”.

Nissan Consult 3 Plus Program Keyless Remote -1

2.Select “MULTI REMOTE ENTRY”.

Nissan Consult 3 Plus Program Keyless Remote -2

3.Select “Work Support”.

Nissan Consult 3 Plus Program Keyless Remote -3

4.When the next screen appears, (section shown below) select “REMO CONT ID REGIST” function to program the remotes.

Nissan Consult 3 Plus Program Keyless Remote -4

ID Code Entry Procedure

STEP 1

Close all doors (Observe the operation of the interior light with each door to ensure the door switches are OK).

STEP 2

Operate lock using the driver side door lock and unlock switch (on P/Window swassy.)

STEP 3

1.Remove and insert the key into the ignition key 6 times within 10 seconds (turning the key barrel switch from OFF to ON counts as 1 time).

2.Hazard warning lamp blinks and all door unlocks.

NOTE:On the sixth key insertion, keep the key in the cylinder with the key barrel switch ON.Does the hazard lamp blink and all doors unlock?YES >> GO TO STEP 4.NO >> GO TO STEP 1.

STEP 4

Within 3 seconds after the hazard lamp blinks and all door unlocks, turn ignition switch to the ACC position and operate lock using the driver side door lock and unlock switch.

STEP 5

1.Press the lock or unlock button of the keyfobto be added.

2.All doors unlock simultaneously.

3.Hazard warning lamp blinks and all door unlocks.

4.Key ID is registered.

Is key ID registered?

YES-1 >> When adding a keyfob: GO TO STEP 6.

YES-2 >> When ending registration: GO TO STEP 8.

NO >> GO TO STEP 1.

STEP 6

Operate lock using the driver side door lock and unlock switch.

STEP 7

1.Press the lock or unlock button of the keyfobto be added.

2.All doors unlock simultaneously.

3.Hazard warning lamp blinks and all door unlocks.

4.Key ID is registered.

Is key ID registered?

YES-1 >> When adding a keyfob: GO TO STEP 6.

YES-2 >> When ending registration: GO TO STEP 8.

NO >> GO TO STEP 6.

STEP 8

Open the all doors >> REGISTRATION END.

No Comments in OBDSTAR

Obdstar X300 Pro 3 Review: Valuable, Good with Asian Models (Nissan, Toyota G/H chip)

OBDSTAR X300 PRO3,Good economy key programmer. Asian models are pretty good but you need to know what you’re doing to use it. . . i.e . how to convert BCM serial no to pin code on Nissan and which ones are 4 digit pin vs. 20 digit pin. It’s not in the manual. Pretty much nothing of value is in the manual except how to plug in and update it.

It’s a game of “where’s waldo” when trying to figure out what model in another market will work to program a particular car (that isn’t an Asian model, i.e. USA Fords). I started a spreadsheet to document what works and what doesn’t. No, I won’t send it to you. . . join some forums and figure it out yourself or pay thousands of dollars for something better like a T-Code that comes with support and a proper manual.

The tool is well made and does a TON of stuff for the money. I bought it exclusively to program G and H chip Toyota and it works perfectly for that.

There’s zero documentation with the eeprom adapter so I haven’t used any of that. Odometer correction is also fairly limited. If you’re expecting a one-tool solution for key programming, this isn’t it but it’s def. worth the price.

One person found this helpful

Look here: my Obdstar key master working for Toyota H and G chip

Obdstar x300 pro 3 and Toyota H chip: success!

Obdstar x300 pro 3 and Toyota G chip: success!

In detail..

Obdstar x300 pro 3 and Toyota H chip:

Car: Toyota Altis Esport

Key type: chip H (47)

Images:

obdstar-key-master-H-chip-remote-1

obdstar-key-master-H-chip-remote-2

obdstar-key-master-H-chip-remote-3

obdstar-key-master-H-chip-remote-4 obdstar-key-master-H-chip-remote-5
obdstar-key-master-H-chip-remote-6

obdstar-key-master-H-chip-remote-7

obdstar-key-master-H-chip-remote-8

obdstar-key-master-H-chip-remote-9

obdstar-key-master-H-chip-remote-10
obdstar-key-master-H-chip-remote-11

Obdstar x300 pro 3 and Toyota G chip:

Model: Toyota Hilux Vigo 2010

Key type: G chip (72)

Images:

obdstar-key-master-H-chip-remote-15
obdstar-key-master-H-chip-remote-17

obdstar-key-master-H-chip-remote-18

obdstar-key-master-H-chip-remote-19

obdstar-key-master-H-chip-remote-20

Porsche PIWIS 3 Keygen Download Free + How to use

Free download keygen for VXDIAG Porsche PIWIS 3

Big thanks to Damien

How do you use the keygen:

This is the method you can try:

Make sure PIWIS is closed.  If it is open, right-click the Taskbar, and run Task Manager.  Select co.porsche.piwis.shell and End Task.

Click Start (WinKey) and type services.msc in the search box. Run services.msc. If the service is running, stop it.

If the Keygen is on the laptop, run it, and leave it open.

Run a Command Prompt.
At the Command Prompt, type:
WMIC BIOS GET SERIALNUMBER

Enter the Serial Number into the Keygen.
Enter the Country into the Keygen.
Change the Expiry Date to 01/01/2030.
The Dealer number is not important, but you can enter one if you know it (7 digit number).
Leave the Challenge Key blank for now.

Click Start (WinKey) and type services.msc in the search box.  Run services.msc
Change the AdminService startup to Automatic, and click Apply.
Click Start to start the service.

Run Piwis3.
Go to the Imprint section.
Enter 4 random digits into the Licence key boxes.
Tick the Accept box, and click License Update – it will say Not Valid – click OK.
Click Licence update twice more and OK.
The Request Key should have disappeared, and the Create Key button should be active – click it.
Place the mouse pointer at the bottom of the screen, and open the Keygen.
Enter the Request Key into the Challenge Key box, and click Generate.
Enter the licence key shown into the boxes on Piwis.  Tick the Accept box and click Licence update.
If successful, you should get a message to reboot.  Click OK, and the computer will shut down.

IMPORTANT!!

After starting the computer, open services.msc again.
Stop AdminService, set startup to Disabled.  You can now run Piwis.

You can also get the serial number by printing out the imprint request.
The snag with that is if you are imprinting a VM, it does not show the complete number.

(Credits to 911Turbo for his great contribution)

This is for your information.

If you don’t have a working PIWIS 3 program or the keygen is not working for you,

you’d better choose decent Piwis 3 software, tested version better.

The circuit diagram in version 37.900 works perfectly even without online access. And whether the updates work now or not is only secondary, the main thing we have to play.

porsche-piwis-3-37900-download-1 porsche-piwis-3-37900-download-2 porsche-piwis-3-37900-download-3
porsche-piwis-3-37900-download-4 porsche-piwis-3-37900-download-5 porsche-piwis-3-37900-download-6 porsche-piwis-3-37900-download-7 porsche-piwis-3-37900-download-8

How to Activate and Update XTOOL A80 H6 Tablet?

Xtool H6 is the latest car diagnosis platform made for technicians. It needs register and activate before use,here is the steps about Xtool A80 H6 Activation and Updating.

Step1. Click the Settings icon on H6 Elite.
Xtool - A80 - H6 - Activation -1

Step2. Turn on Wi-Fi and connect to available internet.

Step3. H6 will automatically prompt that you need to activate, please click NEXT.

Step4. Please fill in the company name and mailbox, (no need to fill in Phone number cause overseas phone number cannot receive the auth code.), then click OK to complete the activation.

Software Upgrading

Step1. Please open H6 APP and click update.

Step2. You can choose Update all or any single software to upgrade.

W639 All Keys Lost Programming with CGDI MB and AC adapter

Test report: CGDI Prog BenzMonster + AC adapter for Mercedes Benz W639 all keys lost.

Hardware: CGDI Prog MB programmer + AC adapter

Software: CGDI MB

EIS: W639

Wiring diagram:

Connection:

Process:

Step 1: read EIS data

CGDI read out EIS data

Step 2: calculate pass

CGDI MB calculated password

NOT by OBD

waiting to read EIS data

pls unplug the direction lock ELV and connect the clip on the yellow line of the OBD line on the directional lock plug (the most fine line in the directional lock connector in the K-Line)

collecting….

pls insert the simulation key within 1 minute. if you have inserted it, pls pull out and try again

you need a key emulator:

collecting….

connection

CGDI MB read EIS data successfully

save data

upload data

query result

success!

Piwis Tester 2 Work For Porsche Cayenne 2014 Kessy Module Matched

Porsche - Piwis - 2 - Porsche - diagnostic - tool-1
How Does Porsche Piwis 2 Matching Porsche Cayenne 2014 Kessy Module

Piwis Tester 2 is Piwis Scan Tool for Porsche Scanner, Piwis Tester 2 with latest V18.150.500 software work for Porsche. Piwis 2 Porsche Scanner work for Porsche old and new car model before 2017. Below CnAutotool.com share how does Piwis tester 2 work for Porsche Cayenne 2014 Kessy Module matching.

Piwis 2 with V18.150.500 Piwis 2 Software for Porsche Scan Tool

Porsche - Piwis - 2 - Porsche - diagnostic - tool-2

How does Cnautotool offer IMMO code calculate for Kessy Module Matched?

1. Firstly, contact email: sale@cnautotool.com to pay for Kessy module IMMO code calculate service,

Then pls send Cnautotool sales order number with Porsche car nameplate to show the Car model, year & VIN numbers.

2. Secondly, connect the Piwis tester 2 interface & Porsche diagnostic laptop to the car, as well as insert power adapter to the car

3. Then, send us Teamviewer id and password of Piwis Tester 2 laptop, and waiting beside the car

4. Need your help to brakes on, headlight on, emergency flashing, turn on & off width lamp to keep the car activate all the time when technician start offline matched Kessy Code.

(Once the Car is sleep during technician do the Kessy module matching, we have to restart processing.)

5.Cnautotool technician will help you matched the kessy module.

Cnautotool Kindly Note:

1. Kessy had better brand new order via VIN number from the dealer

2. If we need matching the Second-hand Kessy Module via Piwis tester 2, pls offer VIN number to calculated the IMMO code firstly.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners or Piwis 2 online programming after change new module just contact us freely.

Lonsdor K518ISE adds VOLVO XC60 2014 Spare Key Success

New customer feedback: VOLVO XC60 2014 Spare Key (semi-smart key) well done with Lonsdor K518S Key Programmer.

Q: How long does it require?
A: Takes less than half an hour.
Q: From where did you get the security data? It require to dismantle something to read it?
A: on the table read CEM with RN-01 PCB dongle takes around 2 mins, after go to the car and program.
VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-1 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-2
Q: Can I do all keys lost?
A: Yes. same job.
Procedure & Photo attached:
Turn on ignition switch
In Lonsor K518, select Immobilizer->Volvo->XC60-> 2009 up->Smart key->Add Key
Select security data (read before operation)
Press Start button
Read vehicle information, part number, VIN etc
Identify current number of keys: 1
Insert new key to be programmed to car slot
Communicating
Key programmed success
VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-3 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-4 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-5 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-6 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-7 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-8 VOLVO-XC60-2014-SPARE-KEY-Lonsdor-K518-9
Here’s the step-by-step procedure on Volvo XC60 key programming with Lonsdor k518ISE.

CGDI BMW Program CAS3 CAS4 All Key Lost No need DME ISN

Why CGDI Prog BMW is one of the must-to-have BMW Devices ?
No need DME ISN or Removing ISN when All Key Lost.

Note: The BMW Data modification and verification license is required. The license is free to use.

Examples:

1.Test CAS3 All keys lost

2.Test CAS4 all keys lost

Preparation:

Read CAS3 eeprom dand CAS4 dflash data with CG Pro or VVDI Prog

1 .Test CAS3 All keys lost No need DEM ISN code

cgdi-bmw-cas-all-key-lost-1

Select BMW Data Modify

Select Data type: CAS3

cgdi-bmw-cas-all-key-lost-2
Load CAS3 eeprom

cgdi-bmw-cas-all-key-lost-4
The current data is CAS for encrypted version data. Click on NO and don’t decrypt the ISN.

cgdi-bmw-cas-all-key-lost-5
CGDI BMW display VIN and CAS ISN code
Copy the ISN code
Go back to CGDI function menu

cgdi-bmw-cas-all-key-lost-6
Select CAS3 Key Match

cgdi-bmw-cas-all-key-lost-7 cgdi-bmw-cas-all-key-lost-8
Load CAS data

cgdi-bmw-cas-all-key-lost-9
Select a unused key position and Generate Dealer Key

cgdi-bmw-cas-all-key-lost-10
Choose Manually enter a known ISN
Paste the ISN code here, press Next

cgdi-bmw-cas-all-key-lost-11
Place the blank key into CGDI key programmer

cgdi-bmw-cas-all-key-lost-12
If the current programmed key is a smart key, the key will be locked.

cgdi-bmw-cas-all-key-lost-10 cgdi-bmw-cas-all-key-lost-13
Program key success. The key is locked.

2.Test CAS4 All Keys Lost

cgdi-bmw-cas-all-key-lost-14

In Tango key programmer,  select BMW->Cars-> CAS4

cgdi-bmw-cas-all-key-lost-15 cgdi-bmw-cas-all-key-lost-16

Upload CAS4 dflash data

cgdi-bmw-cas-all-key-lost-17

Detected CAS4+ Type

cgdi-bmw-cas-all-key-lost-18

Select I have DME ISN

cgdi-bmw-cas-all-key-lost-19

Tango asks to enter a DME ISN code to continue

cgdi-bmw-cas-all-key-lost-20

Go to CGDI BMW, select BMW Data Modify->CAS4 type

cgdi-bmw-cas-all-key-lost-21

Load CAS4 dflash data

The current data is CAS for encrypted version data.
Press Yes to decrypt the ISN

Paste the ISN code to Tango corresponding area

Select a key position and write key.cgdi-bmw-cas-all-key-lost-11