autotool.biz

CAT Diagnostic Software

No Comments in Heavy Duty Diagnostic

CAT Factory Password Keygen Download & How to Use

What is CAT Factory Password Keygen?

When you use CAT Electronic Technician programming for CAT ECM parameters,it will require you to enter two password.So CAT Factory Password Keygen can generate password for this ECM programming.

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-1

CAT Factory Password Keygen Support OS:

Work in all Windows XP operating system. Vista, win7,win10

CAT Factory Password Keygen Download

CAT Factory Password Keygen Test 100% Work version

How to Use CAT Factory Password Keygen:

After download and extract,you will get below files

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-2

It is recommend you before using CAT Factory Password Keygen,you would better to install install fp-kg-patch,in case you get an error about a .dll.

Run ” fp-kg-patch”

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-3
Just click “Next” button to install ” fp-kg-patch ”

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-4
CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-5
CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-6

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-7

After then,run CAT Factory Password Keygen “FP kg.exe”

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-8

The left yellow section is keygen for license keys for STW,SIS,ET,you need to choose product then click “generate site key”
CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-9
And the red section is for Factory Passwords,click to open brose window to load .html file,then click “make factory password”

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-10

It will generate factory password for you

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-11

Now input the password generate from CAT Factory Password Keygen,and click OK

CAT-Factory-Password-Keygen-&ET-SIS-STW-License-Key-Download-12

No Comments in Heavy Duty Diagnostic

2019A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop

We will install the software before ship, so you can get it work directly after you receive it.

2019A Cat ET software as CAT Caterpillar ET 2018A Software update version, 2019A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2019.

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-1

Cat et Caterpillar Electronic Technician Software 2019A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region

Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

Product Description

CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

CAT Caterpillar ET Diagnostic Tool enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.

Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
– 2D and 3D Histogram plotting capability (engine software support required).
– Custom Status screen groups
– Snapshots (Download and display snapshot data recorded by the ECM)
– Configuration Aid that allows upload/download of same configuration to multiple control modules

Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool’s primary functions without connecting to ECM(s)

Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)

Caterpillar ET Software 2019A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.

2. The Heavy Duty Diagnostic tool Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-2

CAT Caterpillar ET Diagnostic Adapter III Main Board

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-3

Hardware

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-4
Package 1 :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-5

Package 2:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck,optional)

2019A-Version-CAT-Caterpillar-ET-Diagnostic-Adapter-III-6

What’s New

What’s New – 2019A

ECM Naming Changes

Certain ECMs connect to the service tool over two data links at the same time. The service tool shows a message popup when the ECM is only detected on one link. The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete. Service tool features that display a connection icon also use a new icon for an incomplete connection.

What’s New – 2018C

No significant new features or feature enhancements

What’s New – 2018B

CEOS Fleet Configuration File TOP

A CEOS (Customer Electronic Option Selection) Fleet Configuration File can be created/modified for an engine using the Service Tool. This is available in connected and disconnected mode.

Error When Launching Service Tool

There is a Microsoft issue with upgrading libraries during an installation involving certain versions of the C++ redistributable. After a successful service tool installation, when trying to run the service tool for the first time, one of the following errors may occasionally appear: “The entry point could not be located in api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll is missing from your computer.” If either of these messages is displayed, please let us know and we will send you to step by step troubleshooting guide. This procedure requires administrator rights.

Service Tool License Corruption Issues with Windows 10 Updates

Windows 10 updates 1709 and 1803 will corrupt service tool licenses. Future Window 10 updates may do the same

If either of license error messages is displayed, please let us know and we will send you to step by step troubleshooting guide.

What’s New – 2018A

Trainer Update – 988K XE Wheel Loader

The 988K XE Wheel Loader has been added to the Trainer application.

What’s New – 2017C

Preferences Option to Save a Product Status Report to PDF

The Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.

What’s New – 2017B

Product Status Report Updates

The Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.

Winflash Screen Update

The screen for the Winflash feature has been updated. A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash. A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.

PC, Communication Hardware, and Cable Requirements

To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

PC Requirements

Recommended Configurations

PC containing a 2.0 GHz dual-core processor

3GB RAM

3GB of the available hard disk drive

DVD-ROM drive (optionally)

15.4-inch XGA Screen (1280×1024 compatible)

Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

USB 1.1 or 2.0 port (for use with Comm Adapter 3)

Ethernet RJ45 connector

Built-in pointing device or mouse

For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.

Note: The most recent version of Microsoft? Internet Explorer may not be validated to work with the service tool.

Wi-Fi (for the Wireless Comm Adapter 3)

Minimum Configurations

PC containing a Pentium 2 GHz processor or greater

1GB RAM

500MB of an available hard disk drive

CD-ROM drive

Super VGA monitor or display (1024×768)

Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

USB 1.1 or 2.0 port (for use with Comm Adapter 3)

Ethernet RJ45 connector

Built-in pointing device or mouse

For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft? Internet Explorer may not be validated to work with the service tool.

Communication Hardware

Caterpillar Communication Adapter III

Configuring Cat Electronic Technician to use the Communication Adapter 3

For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:

Step 1 Start Cat Electronic Technician.

Step 2 Click the Stop Connect button when it appears.

Step 3 Select the Utilities menu.

Step 4 Choose “Preferences > Modify…”.

Step 5 Select the Communications tab.

Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.

NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.

Servicing ECMs on more than one data link requires this check box to be enabled.

Failure to do this will result in undetected ECMs and reduced functionality.

Diagnostic Codes on Caterpillar ET Software

Diagnostic Capabilities

Diagnostic Codes
The engine’s Electronic Control Module (ECM) has the ability to monitor the circuitry between the ECM and the engine’s components. The ECM also has the ability to monitor the engine’s operating conditions. If the ECM detects a problem, a code is generated.

Diagnostic-Codes-on-Caterpillar-ET-Software

There are three categories of codes:
-Diagnostic Code
-Event Code
-Flash Code

-Diagnostic Code – A diagnostic code indicates an electrical problem such as a short or an open in the engine’s wiring or in an electrical component.
-Event Code – An event code is generated by the detection of an abnormal engine operating condition. For example, an event code will be generated if the oil pressure is too low. In this case, the event code indicates the symptom of a problem. Event codes indicate mechanical problems rather than electrical problems.
-Flash Code – Diagnostics and events are reported via flash codes. When a diagnostic code or an event code becomes active, the specific condition is immediately reported to the operator through a series of flashes on the diagnostic lamp. By counting the flashes, a numeric representation of the diagnostic code or event code is revealed.

CAT Caterpillar ET Codes can have two different states:
-Active
-Logged
-Active Codes
An active code indicates that a problem is present. Service the active code first. For the appropriate
troubleshooting procedure for a particular code, refer to the following troubleshooting procedure:
a. Troubleshooting, “Diagnostic Trouble Codes”
b. Troubleshooting, “Event Codes”
Refer to the Troubleshooting, “Diagnostic Code Cross Reference” for information that relates to converting flash codes to the equivalent diagnostic code or to the equivalent event code.

-Logged Codes
The codes are logged and stored in the ECM memory. The problem may have been repaired and/or the problem may no longer exist. If the system is powered, it is possible to generate an active diagnostic code whenever a component is disconnected. If the component is reconnected, the code is no longer active but the code may become logged.
Logged codes may not indicate that a repair is needed. The problem may have been temporary. Logged codes may be useful to help troubleshoot intermittent problems. Logged codes can also be used to review the performance of the engine and of the electronic system.

FREE License Key for Caterpillar ET (Electronic Technician) Software

1. First Step, install Caterpillar ET Software: ET_2010A_v1.0, wait until Status is complete.

FREE-License-Key-for-Caterpillar-ET-(Electronic-Technician)-Software-1

2. Second Step, Open Caterpillar ET through shortcut on Desktop or Start Menu/ All Program, double click on Electronic Technician.
After Software opened, will showing a Message Box as below;

FREE-License-Key-for-Caterpillar-ET-(Electronic-Technician)-Software-2

NOTE: Software is Not Licensed, then Click YES..

FREE-License-Key-for-Caterpillar-ET-(Electronic-Technician)-Software-3

Yap, I have Software to Generate License Key, Full Service Dealer ET

FREE-License-Key-for-Caterpillar-ET-(Electronic-Technician)-Software-4

Please comment your License Code, I will give you License Key to activate your Electronic Technician Software.

Create Product Status Report (Download List) on Caterpillar ET Software

How to Create Product Status Report (Download List) on Caterpillar ET Software?

-Open Caterpillar ET Software, Click on Menu “Information – Product Status Report”, and Mark on “Download List”.
小图以张

-Click on “Create Report”, wait until process complete, and Click “Save As” to Save Product Status Report file to your documents (.xml)
-Example Product Service Report Download (pdf format);
Click Link below:
PSR Download

Cylinder Cutout Test using Caterpillar ET Software

How to perform Cylinder Cutout Test using Caterpillar ET Software?

Purpose:
The cylinder cutout test allows one cylinder or multiple cylinders to be cut out. The cylinder cutout test is useful when troubleshooting poor engine performance or a suspected injector failure.

Test Operation:
The cylinder cutout test disables the injector by not providing the injector pulse to the solenoid. The cylinder cutout test can be performed on one injector or multiple injectors at once.

-Connect to CAT ET Software,
-Open Menu: Diagnostics – Diagnostic Tests – Cylinder Cutout Test

Caterpillar - ET - Software -1

-Click Start, then Select Cylinder Cutout Test
for Example: choose 1-Cylinder Cutout Test
Caterpillar - ET - Software -2

-Click Continue, then OK

Caterpillar - ET - Software -3

-Wait until All Cycle Test (Cylinder 1-6) finished, and look at the Results on Fuel Position tab, the smallest value than the others, indicates that could be damaged on Injector (for Example: Cylinder 1).

Caterpillar - ET - Software -4

NOTE:
1-Cylinder Cutout Test Conditions,
The following conditions must be met for the Automatic Cylinder Cutout Test
1) Engine Speed must be between 980 RPM and 1020 RPM (Engine Speed will automatically adjusted)
2) Engine Coolant Temperature must be 170 Deg F or higher
3) No Engine Performance related active diagnostic codes are allowed
4) No default Injector Serial Number (000000000000) allowed
5) Throttle position must not vary by +/- 5%

Caterpillar - ET - Software -5

If at any time any of these conditions are not met, the test will automatically aborted.
-Ensure Transmission is in Neutral or Electrical Load is removed from Generator.
-Fan cycling, A/C compressor cycling, or changes in Engine Load will invalidate this test.
-If the fan is not controlled by the Engine ECM, please Enable the fan if possible.
-WARNING: If the ECM controls the fan, the fan will be turned ON automatically upon starting this test.
-WARNING: Please make sure the Compression Brake is in the OFF position. During the test, Compression Brake operation will cause the Engine to surge.
for Example: 1-Cylinder Cutout Test Aborted

Caterpillar - ET - Software -6

Manual Cylinder Cutout Test
-Click on Change – Start – Stop tab, and look at Fuel Position value.

Caterpillar - ET - Software -7

Cleveland Brothers Opens New One Call Rentals Facility in Washington, Pa.

Cleveland-Brothers-Opens-New-One-Call-Rentals-Facility-in-Washington-Pa
Cleveland Brothers continues to grow–and is proud to announce our newest facility opening in Washington, Pa. Serving the Pennsylvania, northern West Virginia and western Maryland areas, we have expanded our facility locations to reach more customers in the Washington area by providing quality products and services you can trust.

The new One Call Rentals store focuses on rental, sales, parts and service with an emphasis on building construction products. Opened on April 1, 2019, the Washington facility features a full line of mid-size and compact CAT Caterpillar ET– machinery, such as mini-hydraulic excavators, skidsteer loaders, telehandlers, smaller dozers and wheel loaders. In addition, the facility provides a variety of allied equipment rental options including light towers, small dump trucks, aerial lifts and more to help you complete any job you face.

So whether you are backfilling against a home, landscaping or undergoing residential development, Cleveland Brothers offers simple and affordable solutions to to aid contractors, landscapers, excavators and more. And now, we are closer than ever. Just seconds off of Interstate 70, you’ll find quick and easy access to the new facility, which showcases the new and rental equipment in its yard.

With an increasing local demand for compact equipment, parts and service, Vice President of Rental/General Construction at Cleveland Brothers Darrin Foulk found an imminent need for this new facility. “We’ve experienced a growing need in Washington and the surrounding area for our equipment, parts and service,” said Darrin Foulk. “Now that we’ve opened, we can meet these needs of our customers quickly and efficiently.”

Cat Connect technology and services are helping our customers save time, fuel and money.

In a time of increasing fuel costs, plunging profit margins and massive competition, every piece of your business counts. Every machine, safety device and service is an opportunity to be more efficient. Cat? Connect makes the most out of these opportunities, and helps you work more efficiently and get more competitive in your space.

D/N Excavating is a prime example of customers reaping the benefits of Cat Connect. The two-man team out of Massachusetts were able to increase their machine efficiency by nearly 28%. This increase was vital as they had taken on a job that was beyond their original capacity. They worked with their Cat dealer to enhance and expand their fleet with CAT Electronic Technician. By going with Cat Connect, the duo was able to monitor and analyze the health of their machines, and their operators. This increase enabled Scott Duso and Dan Nusbaum to not only finish the development project on-time and on-budget but they went on to win bigger jobs, eventually doubling their gross sales in just two years.

Strack Inc. uses Cat Connect to not only run their machines for 48 hours straight, but spend 40% less on fuel in the process. This keeps profit margins high, giving them the power to bid on bigger jobs and come in lower than the competition.

In southern Turkey, contracting outfit Eren Insaat worked with their local Cat dealer to install Cat Connect on their fleet of 17 machines. The technology gave their entire fleet the ability to work through the night, effectively doubling their output and leading to massive time and cost savings. “The efficiency is about 400 percent greater with the GPS control—the men can work not only faster but also more accurately” said Yasar Eren, Eren Insaat’s chairman.

When tackling jobs of any scale, anywhere on earth, customers are using Cat Connect to take them on and finish in less time leading to huge savings, and more business in the future.

CAT SIS KEYGEN 2011201220132014 (2011B) keygen

The keygen is unlocked version,  you can  run the keygen on more  computers.
Notice:
To activate the not only need license by keygen, but you also need a user name and password file. We offer both two files.
We also can send this item by an email, This is a keygen ,as activate 2012/2013 CAT SIS.
This item Only for CAT SIS not for CAT ET,We also have Caterpillar ET keygen and software.
So it’s important for you to makesure the vision of your    software.and then make orders according to the software vision.
The installation and activation of software for beginners is a little harder.We will help you step by step until the registration is successful!
We will do our best for you.

CAT-SIS-KEYGEN