autotool.biz

Month: October 2019

No Comments in Mb Star

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual

MB SD Connect Compact 4 Star Diagnosis WIFI Setting Manual
We know The MB SD Connect Compact 4  can connecting with Both Lan cable and WIFI, some customers might have question and problem about how to setting WIFI.  www.obd2tool.com  share with you about WIFI setting on SD Connect C4
How to Setting Mb SD Connect C4 Star Diagnosis WIFI ?
Steps by steps instruction:
Click wireless network icon to select “View Available Wireless Network”.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-1

Click “Refresh network list”.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-2

Click “Change advanced settings”.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-3
Select Wireless Network.
Tick on “Use Windows to configure my wireless network setting”.
Click Add.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-4

Enter Network name..
Tick on “Connection even if this network is not broadcasting”
Cancel tick on “The key is provided for me automatically”.
Tick on “This is a computer-to-computer (ad hoc) network; wireless access points are not used”
Enter network key and confirm it. (network key: 26 a)

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-5

Go to Connection and tick on “correct when this internet is in range”, then click OK.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-6
MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-7
MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-8

Enter the network key and click Connect.
Click the red circle in the menu bar.
Select Configuration and then click Yes.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-9
MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-10

Select MUX>> Register/Configure.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-11
Select Encryption: WEP/Hex and enter the key (26 “a”s), then click Start.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-12
Click OK.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-13

Close Administration interface.
And you will see the network set just now is connected.

MB-SD-Connect-Compact-4-Star-Diagnosis-WIFI-Setting-Manual-14

That’s all finished
If you have a MB SD Connect Compact 4 wanna setting wifi or do not know how to setting WIFI, please can following with this instructions, hope it would help you.
If you wanna USE SOFTWARE DIRECTLY , we recommend you buy the SD C4 plus DELL D630 Laptop package.

No Comments in Auto Scanner Tools

HOW TO RESET OIL SERVICE LIGHT MANUALLY

Todays, especially in last generate vehicles, service light or Insp light turns on to notify that it is the time to routine maintenance. This service light turns on at the intervals that programmed on the vehicle’s ECU(10000-15000 km) and warns you that you should put the vehicle in service for routine maintenance. After the maintenance finished, The service light remains on.

Service lamp is reset in order to turn off to this lamp and enter the next maintenance distance of the vehicle.

Todays, service light resetting operation is performed manually or via Diagnostic Tools.

Manual oil service light resetting operations are as below;

AUDI A3 OIL SERVICE LIGHT RESET

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-1

AUDI A4 OIL SERVICE LIGHT RESET

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-2

BMW 3 SER?ES OIL SERVICE LIGHT RESET

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-3
HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-4

BMW 5 SERIES OIL SERVICE LIGHT RESET(F-10, F-11)

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-5
HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-6

BMW 8 SERIES OIL SERVICE LIGHT RESET

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-7
HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-8

BMW X5 SERIES OIL SERVICE LIGHT RESET

HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-9
HOW-TO-RESET-OIL-SERVICE-LIGHT-MANUALLY-10

BMW Z SERIES OIL SERVICE LIGHT RESET

Bmw Z Serisi

CHEVROLET CAPTIVA OIL SERVICE LIGHT RESET

Chervrolet Captiva

CHRYSLER GRAND OIL SERVICE LIGHT RESET

Chrysler Grand

CITROEN BERLINGO OIL SERVICE LIGHT RESET

Citroen Berlingo

FIAT DOBLO OIL SERVICE LIGHT RESET

Fiat Doblo

FORD CMAX OIL SERVICE LIGHT RESET

Ford C Max

FORD FIESTA OIL SERVICE LIGHT RESET

Ford Fiesta

FORD FOCUS 2011- OIL SERVICE LIGHT RESET

Ford Focus 2011

FORD MONDEO OIL SERVICE LIGHT RESET

Ford Mondeo

FORD TRANSIT OIL SERVICE LIGHT RESET

Ford Transit

HONDA CIVIC OIL SERVICE LIGHT RESET

Honda Cvc

HONDA CRV OIL SERVICE LIGHT RESET

Honda Crv

HONDA JAZZ OIL SERVICE LIGHT RESET

Honda Jazz

JEEP CHEROKEE OIL SERVICE LIGHT RESET

Jeep Cherokee

JEEP COMPASS OIL SERVICE LIGHT RESET

Jeep Compass

MAZDA 3 OIL SERVICE LIGHT RESET

Mazda 3

MERCEDES A SERIES OIL SERVICE LIGHT RESET

Mercedes A Serisi

MERCEDES C SERIES OIL SERVICE LIGHT RESET

Mercedes C Serisi

MERCEDES VITO OIL SERVICE LIGHT RESET

Mercedes Vito

MINI CLUBMAN OIL SERVICE LIGHT RESET

Mini Clubman Cooper

MITSUBISHI ASX OIL SERVICE LIGHT RESET

Mitsubishi ASX

MITSUBISHI LANCER OIL SERVICE LIGHT RESET

Mitsubishi Lancer

NISSAN MICRA OIL SERVICE LIGHT RESET

Nissan Micra

NISSAN NAVARA OIL SERVICE LIGHT RESET

Nissan Navara

NISSAN NOTE OIL SERVICE LIGHT RESET

Nissan Note

NISSAN QASHQAI OIL SERVICE LIGHT RESET

Nissan Qashqai

OPEL ASTRA OIL SERVICE LIGHT RESET

Opel Astra

OPEL CORSA C SERIES OIL SERVICE LIGHT RESET

Opel Corsa C Serisi

OPEL CORSA D SERIES OIL SERVICE LIGHT RESET

Opel Corsa D Serisi

OPEL VECTRA C SERIES OIL SERVICE LIGHT RESET

Opel Vectra C

PEUGEOT 307 OIL SERVICE LIGHT RESET

Peugeot 307

PEUGEOT 308 OIL SERVICE LIGHT RESET

Peugeot 308

PEUGEOT 407 OIL SERVICE LIGHT RESET

Peugeot 407

PEUGEOT PARTNER OIL SERVICE LIGHT RESET

Peugeot Partner

RENAULT CLIO OIL SERVICE LIGHT RESET

Renault Clio 3

RENAULT KANGO OIL SERVICE LIGHT RESET

Renault Kango

RENAULT LAGUNA 3 OIL SERVICE LIGHT RESET

Renault Laguna 3

RENAULT MEGANE 2 OIL SERVICE LIGHT RESET

Renault Megane 2 2005

RENAULT MEGANE 3 OIL SERVICE LIGHT RESET

Renault Megane 3

RENAULT SCENIC OIL SERVICE LIGHT RESET

Renault Scenic

SEAT CORDOBA OIL SERVICE LIGHT RESET

Seat Cordoba

SEAT LEON OIL SERVICE LIGHT RESET

Seat Leon

SKODA FABIA OIL SERVICE LIGHT RESET

Skoda Fabia

SKODA OCTAVIA OIL SERVICE LIGHT RESET

Skoda Octavia 2

SKODA SPURB OIL SERVICE LIGHT RESET

Skoda Spurb

TOYOTA HILUX OIL SERVICE LIGHT RESET

Toyota Hilux

TOYOTA LAND CRUISER OIL SERVICE LIGHT RESET

Toyota Land Cruiser

TOYOTA RAV4 OIL SERVICE LIGHT RESET

Toyota Rav 4

TOYOTA YARIS OIL SERVICE LIGHT RESET

Toyota Yaris

VOLKSWAGEN JETTA OIL SERVICE LIGHT RESET

Volkwagen Jetta

VOLKSWAGEN PASSAT CC OIL SERVICE LIGHT RESET

Volkwagen Passat Cc

VOLKSWAGEN GOLF VI OIL SERVICE LIGHT RESET

Vw Golf V

VOLKSWAGEN POLO IV OIL SERVICE LIGHT RESET

Vw Polo

VOLKSWAGEN POLO V OIL SERVICE LIGHT RESET

Vw Polo V

VOLKSWAGEN TIGUAN OIL SERVICE LIGHT RESET

Vw Tiguan

VOLVO S60/V60 OIL SERVICE LIGHT RESET

Volvo S60 V60

VOLVO S80 OIL SERVICE LIGHT RESET

Volvo S80

VOLVO XC60 OIL SERVICE LIGHT RESET

Volvo Xc60

No Comments in Mb Star

V2019 09 HDD SSD Software for MB SD Connect C4 C5 New Release

Recently, We released latest V2019.9 software for Mb SD C4/C5 Diagnostic Tool.

1. V2019.9 HDD Software , Promotion price is 88USD

Purchase link:

https://www.cnautotool.com/goods-335-MB-SD-Connect-Compact+4+Star+Diagnosis-Tool-Plus-Dell-D630-Laptop.html

Top 5 reasons to get MB SD C4/C5 Software HDD:
1.Include Xentry Das EPC WIS ST Finder Vediamo and DTS Monaco work HHT WIN
2. MB SD Connect C4 C5 Engineering Latest software version: V2019.9, DELL D630 Format, 500G HDD
3.Support Windows 7/10 system.
4.Available for all MB SD C4/C5 on the market.
5.Supporte Multi-languages

2. V2019.9 SSD Software, Promotion price is 238USD

Top 4 reasons to get MB SD C4/C5 SSD Software:
1.Latest software version: V2019.9, DELL D630 Format, 500G SSD
2.Support Windows 7/10 system.
3.Available for MB SD C4/C5 on the market.
4.High quality, and SSD Version can run faster than other version.

If you are looking for the new version MB STAR Software , we strongly recommend you to purchase this HDD/SSD.













No Comments in Mb Star

VXDIAG Benz C6 New Firmware Update Supports V2019.09 Xentry

VXDIAG Mercedes Benz C6 multi tool released new firmware and driver update in March 2019.  With the new update you can use the latest V2019.09 Xentry XODS software with the C6 multiplexer.

Fix bugs: parts of SCN coding failure HU5 in XENTRY
Fix bugs: Audio DoIP programming failure HU5 in XENTRY
Add: XENTRY 2019.03 compatibility
Add: XENTRY Diagnosis VCIRecovery, after connect VXDIAG Benz C6, go to VCIRecovery to choose proper software:

C:\ProgramData\VCX\Apps\BENZC6\VCIRecovery_XENTRY_201812.exe
C:\ProgramData\VCX\Apps\BENZC6\VCIRecovery_XENTRY_201903.exe
How to Update VXDIAG Benz firmware?
After install and configure Xentry XDOS software, install VX Manager and follow steps below:
update-vxdiag-benz-c6-firmware-1
1.Update VCX Plus firmware to 1.5.2.0
Press Firmware Update
update-vxdiag-benz-c6-firmware-2
2.Update DoIP firmware to 1.5.2
1) Update DoIP
2)Download firmware
3) Update
4) Finish DoIP firmware update
update-vxdiag-benz-c6-firmware-3
3. Install BENZ C6 new driver 3.0.8.306
How to configure VXDIAG Benz C6 VCI?
Follow steps below to configure VCI.
update-vxdiag-benz-c6-firmware-4
1. Open ConfigAssist, choose XENTRY Diagnosis VCI
update-vxdiag-benz-c6-firmware-5
2.Press Configure
update-vxdiag-benz-c6-firmware-6
3.Press Continue
update-vxdiag-benz-c6-firmware-7
4.Press Continue
update-vxdiag-benz-c6-firmware-8
5. Unable to detect StartKey, select Manually enter StartKey
update-vxdiag-benz-c6-firmware-9
6. Manual enter StartKey and save

update-vxdiag-benz-c6-firmware-10
7. Save StartKey sucess

update-vxdiag-benz-c6-firmware-11
8. Select Couple VCI (Connect VCI)

update-vxdiag-benz-c6-firmware-12
9. Configuration is done.
10. Restart computer
update-vxdiag-benz-c6-firmware-13
You will see C6 Benz icon and VCI number after connection.
How to use VXDIAG C6 Benz VCIRecovery?
The new firmware adds VCIRecovery function with which you can exchange old and new Xentry software versions.
Note: The latest firmware supports latest XENTRY Diagnosis 03/2019. If you want to use older version pre-2018, need to exchange between the VCIRecovery.
update-vxdiag-benz-c6-firmware-14
1. Run VCIRecovery on desktop and go to

C:\ProgramData\VCX\Apps\BENZC6
update-vxdiag-benz-c6-firmware-15
Select proper VCI version to run your software.
update-vxdiag-benz-c6-firmware-16
2. Press Update to run firmware update untill you succeeded.

No Comments in Mb Star

installation and initial setup of the MB STAR C3 diagnostic system.

Tonight we pick up our series: installation and initial setup of the Mercedes Benz Star diagnosis C3 diagnostic system.

As mentioned, it’s best to have a dedicated “shop” laptop computer that is used for the MB STAR C3 installation. I actually mimicked the actual MB STAR system by purchasing at Sears a Craftsman rolling cart with hinged top, two drawers and a lower shelf, to hold a Hewlett-Packard inkjet printer for printing out reports generated by the MB STAR C3 system. The drawers come in handy for storing the diagnostic cables that go with the system; I also added my home-made “blink code reader” and my 38-pin “Mushroom” diagnostic adapter just to round things out and to have all of the MB diagnostic equipment in one place.

First of all, the hard drive of the computer needs to be 160 GB or greater; the processor frequency of the computer should be at least 1.8 GHz, and the computer should have at least 1 GB of RAM installed (more is better). My computer had all of these parameters except that it has 3 GB of memory installed. This is a real bonus as you will see in a little while. If you can purchase RAM and add it to the computer, it is advisable to do this as RAM is pretty cheap, particularly for older-model computers.

The first step is to prepare the computer for the installation. Using the operating system master disk that came with the computer, it’s recommended to just re-format and re-install a virgin copy of the Microsoft Windows XP operating system onto the computer’s hard drive. Then, you should connect the computer to the Internet (via wireless or via RJ-45 “Ethernet” cable) to update the software, to bring it up to full Service Pack 3 status and to install all of the current security and product updates, as necessary. Next, you will need to partition the hard drive into two logical drives, using a free disk-partitioning program that you can download on the Internet. There are dozens available for Windows, so it shouldn’t be hard to find one. I recommend that you partition your hard drive into two equal 80GB partitions. One will likely be drive “C” and the other partition will likely be “E” or “F” when you are done. You can also choose to partition your hard drive BEFORE you re-install the virgin copy of Windows XP, depending on what you want to do. Either/or.

Next, you want to “clone” the USB hard drive you that comes with the MB STAR C3 kit onto the second partition. Again, there are numerous, free, downloadable disk-cloning software packages available on the Internet. It wlll likely take about 3-5 hours to completely clone the external drive onto the new drive. The reason for doing this is two-fold:

a) you want to preserve your external hard drive as a backup “master” copy of the Mercedes Star Diagnosis MB STAR C3 software, in case something goes wrong and it has to be re-installed;
b) performance of the MB STAR C3 system is MUCH better when it’s installed on an internal hard drive than when it’s installed on an external drive; and
c) it’s just unwieldy to have a USB drive hanging off the side of the computer connected with a USB cable; much cleaner just to have everything inside the laptop case.

So, now you’ve cloned the disk and you’re ready for the install.

First, a little background about the MB STAR C3 DAS system, as it comes from the cloners. Essentially, what ships on the hard drive is a Virtual Machine copy of an official MB STAR C3 IBM T30 laptop as shipped by Mercedes-Benz to the purchaser. The Chinese cloners have saved an image of this hard drive as a Virtual Machine image, which is then “played” in a Virtual Machine (in this case, VMWare) on the new computer. So, technically, it’s a computer operating within a computer, hence the name “virtual machine”. Because no processor or software emulation needs to be done, i.e. you’re not running Windows on a Macintosh or vice versa, the speed is actually pretty fast once the Virtual Machine is up and running.

In any case, once you have cloned the MB STAR C3 hard drive to the computer, then you will see a VMWare Player installer icon. You double-click this icon, and it will begin the installation process for the VM. It will ask you a bunch of questions (you just keep clicking on the “Next” button and then it installs the VMWare Player on the “C” (main) hard drive of the computer. It will probably put icons for the VMWare player on the desktop, in the menu bar and in the Start Menu folder as part of the installation process.

After that, you will have to restart your computer to complete the installation process, which is normal. After you restart, everything should be installed correctly. It’s a pretty typical Windows software install and it goes pretty quickly and smoothly. Remember, you’re just installing the Virtual Machine PLAYER that the MB STAR C3 disk image runs inside of. So next, you have to tell the Virtual Machine WHAT it needs to run. To do this, you have to go to the hard drive that you cloned the external hard drive to (typically the E: or F: drive) in your “Windows Explorer” program or by double-clicking on the “My Computer” icon on the desktop or in the Start Menu. From there, you will see an icon with the name something like “DAS_2012.10.vmx” or something similar. This is the disk image file with the date of the cloned copy in the name of the file — in this case, corresponding to the October, 2010 copy/update of the MB STAR C3. The .vmx extension on the file name indicates that the file is a VMWare virtual machine image.

So, you should double-click on this file, and it should automatically launch the VMWare Player that you installed, and the MB STAR C3 software playing in the Virtual Machine will ask your for an 8-digit password. Typically, with the Chinese clones you take the first 8 characters off of the serial number sticker that is on the hard drive (it’s the hand-written alphaneumeric character string that is on the label on the hard drive case) and type that in. From there, it will start loading the MB STAR C3 software. After a minute or two, the main (“Desktop”) screen of the MB STAR C3 system will appear. You have the option to run the Virtual Machine full screen (which I recommend) or you can just run it within a window on your screen.

The Desktop screen of the MB STAR C3 (see first image below) contains a number of icons, which correspond to the various program elements that comprise the system. These individual programs generally correspond to the following functions (various clones may have slight to moderate variations of what is listed below, depending on the vendor and the extent of the clone):

Xentry – the “master control program” which is the hub of the MB STAR C3 DAS system, serving as the gateway out to most of the other individual key DAS modules
Star Finder – a program that allows (beginning with W210 cars, and all newer chassis) the user to pinpoint the location of components on the car
EPC – the Electronic Parts Catalog (same as US users have access to online; the MB C3 STAR versions are probably a bit out of date)
WIS – the Workshop Information System, a collection of all processes and documents pertaining to repair and maintenance of all the vehicles
Star Utilities – a collection of utilities that help the user administer the MB STAR C3 system — must be used VERY carefully !!
Info – information about the MB STAR C3 system
EWA net – the administration program for the core, EPCnet and WISnet functions that tracks passwords and user access
Star Browser –
PL 65 – a price list of MB parts prices (generally out of date, but often a good indicator of pricing)
SD Media – a collection of instructional information and video procedures for diagnosing and solving problems
TeamViewer 6 – a non-Mercedes remote access program that allows the vendor to control your computer if you need technical support/assistance. Specific program varies by vendor.

EWA Net software interface

MB-STAR-C3-diagnostic-system-1

Typically, because the Chinese cloned copy of the MB STAR C3 DAS is a copy of a real system, taken at a point in time in the past, you will at this point have to change the day and year of the Virtual Machine (not your Windows XP system date and time, though you can do this too if you wish) to correspond with that of the day, month and year found in the file name of the Virtual Machine image on the hard drive provided with the system. Generally, the vendor will provide you with a specific date that you should change it to. It is IMPERATIVE that you do this before EVERY time you start up the MB STAR C3 system; otherwise you will get errors and you won’t be able to properly run the Xentry software because it will be out of date.

So, after you’ve changed the system date in the Virtual Machine, you should double-click on the “Star Utilities” icon on the desktop to begin the actual configuration of the MB STAR C3 installation. You will then click on the “StartKey Manager”. At this point, a dialog box will pop up, and you have to select the “Xentry diagnostic” option in the Application menu.

The system will then provide you with several pieces of information, which you should write down. These bits of information include:

HW-ID
APP-ID
Start Date
Finish Date

Then you will see a place to fill in a long alphanumeric string of characters, which is an overall system access password. To obtain this, you have to provide the aforementioned bits of information to the vendor, and they will generate the alphanumeric code for you. This is several dozen characters in length. You enter this alpha code into the provided field, and if everything checks out and is correct, you will see a small box pop up that says “Saved Successfully!”. That means you are good to go, and you can then start and enter the MB STAR C3 DAS system.

From there, what you want to do is to fire up the Xentry software by double-clicking on the Xentry icon. The second and third images below show the Xentry software in the process of loading, as well as its main screen.

Next installment will be a detailed exploration of the Xentry software and its links out to the various components of the MB STAR C3 DAS system.

Hope you enjoy this!

MB-STAR-C3-diagnostic-system-2 MB-STAR-C3-diagnostic-system-3 MB-STAR-C3-diagnostic-system-4

No Comments in Mb Star

Mb Star C3 for Benz Trucks & Cars 2018.09 version

Newest software: 2019.07

Multi-Language: English, French, Spanish, Portuguese, Italian, Japanese, Ruassian, Croatian, Czech, Danish, Dutch, Finish, Greek, Hungarian, Korean, Polish, Romanian, Swedish, Turkish, Chinese
Mb Star C3 has past truck test. It can used to do benz trucks

Mb Star C3 Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Mb Star C3 New Features:
1.This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2.With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3.Every hard disk has it’s special number,have self-test function.Just give us the self-test report and the number,we will find out what’s the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!
4.What is most important, this Mercedes Star Diagnosis C3 has past truck test.It can used to do benz trucks.

Mb Star C3 Testable System:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Product Software Includes:
1.D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2.W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3.EPC.net : Electronic Parts Catalog
4.ST Finder:Part location finder
5. STAR UTILITIES : the movement management system and self-test

MB Star C3 Supported Vehicle List:

Support Mercedes Benz Cars After Year 2000

Passenger Car Support List:
A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),
E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),
M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)
 
Van Support List:
MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Support List:
Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Support List:
U20,  UGN,  UHN

Bus Support List:
TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,  Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,  FURTHER MODEL SERIES
 
Super Sports Car Support List:
SLR(199)

Mb Star C3 Package List:
1x MULTIPLEXER
1x 16Pin OBD II Cable
1x 4Pin Cable
1x 38Pin Cable
1x 14Pin Truck Cable
1x COM Cable
1x RS232 to RS485 Cable
1x Serial Adapter Cable
1x Hard Disk  (optional)

No Comments in Auto Scanner Tools

VXDIAG Porsche PIWIS Tester III Software Update to V38.300.030

The latest Porsche PIWIS III software V38.300.030 has been tested and verified working great with VXDIAG VCX DoIP Porsche Tester III scanner.

Release 38.300.030
08/21/2019

Multi-language: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese
Update method: purchase new HDD/SSD
With Developer mode
vxdiag-porsche-software
Connection: Wireless Function
Multi-language: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese
Operating System: Win8-64 bit
Update method: Send SSD back
Support Porsche Models till 2019 year including latest DoIP models
Compatible hardware:
VXDIAG-VCX-DoIP-Porsche-PIWIS-Tester-III-Compatible-hardware

OEM Porsche Tester III (PT3G)
All Porsche from 1998-2019:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011

CnAutotool VXDIAG Multi Tool PIWS3 Features & Functions:
New operating system and more intuitive software interface
New VCI, support for models with DoIP diagnostics after 2017
Maintenance, repair, control unit replacement, programming code
Login online anti-theft matching programming
Guided fault finding
Maintenance circuit diagram view
Engineer mode (development version) can support special functions such as installing, modify, Flash.
Panamera

No Comments in Auto Scanner Tools

PIWIS III Porsche Piwis Tester For Porsche Car After 2017

Porsche PIWIS III is the newest Porsche Diagnostic Tool in the market. PIWIS III PST3 can replace Porsche Piwis tester II completely. PIWIS III compare with Piwis II, support Porsche new model after 2018. Most client request for Piwis 3 recently.

Kindly note: Only Porsche Piwis 3 Original in stock now.obd2tool.com have Original Piwis 3 with Panasonic CF-54 installed the Piwis III software ready to use for sale.

PIWIS 3 Porsche VCI3 Porsche PIWIS Tester III with Panasonic CF 54 obd2toolcom PIWIS III Porsche Piwis Tester 3 For Porsche Car Till 2018

Porsche Piwis Tester III Package:

Porsche-Piwis-Tester-III-Package

It covers all new vehicle models up to 2018
1. Current software version: 36.700 (developer mode enabled)
2. Laptop: Panasonic CF-54
3. Update Method: By SD card

Client will get original Diagnostic Scan Tool PIWIS III Porsche VCI3 with the latest software installed on Panasonic CF54 ready to use from obd2tool.com. Piwis Tester III support regular software updates, Piwis III full set come with developer mode option for additional functionality, which support navigation map conversion, unlimited license.

PIWIS TESTER III VEHICLE COVERAGE UP TO 2018:
1. 911
2. Cayenne
3. Macan
4. Boxster/Cayman
5. Panamera
Piwis III Porsche PST3 can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Especially if Porsche were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function. It is the absolutely necessary tool for the job.
PIWIS Tester III Porsche PIWIS III Software 2 PIWIS III Porsche Piwis Tester 3 For Porsche Car Till 2018

Porsche-Piwis-Tester-III-Language

PIWIS3 with Panasonic CF-54 full support Porsche car diagnostic and programming, Piwis III ‘s latest Porsche scanner is only one PIWIS Tester work for Porsche Car after 2017. Piwis III replace Porsche Piwis 2 for Porsche new models.