autotool.biz

Month: June 2018

No Comments in Mb Star

How to Solve Star Diagnosis Star C3 Xentry Diagnostics StarUtils

Star Diagnosis Mb Star C3 is the best Mercedes star diagnostic system for old vehicles and trucks.Star C3 Xentry Diagnostics software is the xentry openshell xdos 2015.12.One of customers got the Star C3 Xentry Diagnostics error StarUtils Save Not Successfully.Bellow CnAutotool.com share you the the solution.

Super MB Star Diagnose Compact3 Full AutoLink C3

12-1

A Quality Super Mercedes Star Diagnosis Compact3 Full AutoLink Blue C3

Star C3 Xentry Diagnostics StarUtils Save Not Successfully  Error:

StarUtils

Save Not Successfully

licSaveLicense XENTRY Diagnostics

13 – Store operation tried to save a StartKey which is older than existing StartKey with the same application ID.

Possibility of using fake old StartKey with higher permissions.

12-2

CnAutotool.com Tech Support Team:

Solved!!

First delete lic-key2.dat in the local disk C:

Second change the Date and Time of your PC (should be same as the real)

The last but important, check if your activation is correct or not

What You Need To Run Caterpillar Electronic Technician

To run your service tool, you will need to meet the following PC Requirements, communication hardware, and cables.

Note: The minimum PC Configurations should not be used as a standard when buying new personal computers to run the CAT Electronic Technician If you have existing equipment that meets these minimum requirements, it will run your service tool.

PC Requirements
Recommended Configurations
* IBM? PC compatible with Pentium IV 2.4 GHz processor
* 1GB RAM
* 1GB available hard disk drive or higher
* File transfer device
* 15 inch XGA Screen (1280×1024)
* Microsoft Windows? 2000 SP4, or XP SP2 operating system
* RS232 port with 16550AF UART or compatible
* Built in pointing device or mouse
* Microsoft Internet Explorer 6.0 or later version Minimum Configurations
* IBM? PC compatible with Pentium IV 1.8 GHZ processor
* 512MB RAM
* 1GB available hard disk drive or higher
* File transfer device
* 14.1 inch XGA screen (800×600)
* Microsoft Windows? 2000 SP3, or XP operating system
* RS232 port with 16550AF UART or compatible
* Built in pointing device or mouse
* Microsoft Internet Explorer 6.0 or later version

Communication Hardware
171-4400 Tool Group – Heavy Duty Diagnostic Caterpillar Communication Adapter II
Note: For additional requirements, see “Setting up Caterpillar Communication Adapter II,” .
OR–
7X1700 Tool Group – Caterpillar Communication Adapter
Note: For additional requirements, see “Setting up Caterpillar Communication Adapter,” section 2.
OR–
MPSI Pro-Link? 9000 (only for On Highway Truck engines and certain commercial applications)
Note: For additional requirements, see “Setting up MPSI Pro-Link 9000,” section 2.

Exceptions
The requirements for Challenger Technician (CT) from CnAutotool.com, M300 Technician (M300), and Hydraulic Excavators B-Series (HEX) are the following:
CT: 1U9100 Cable Assembly – Challenger to PC Adapter cable
M300: 126-7877 Cable Assembly – M300 to PC Adapter cable
HEX: 127-9797 Cable Assembly – HEX to PC Adapter cable

Note: For HEX, in the Communications tab of the Preferences dialog box, select the Communication Adapter option from the Communication Interface Device drop-down list. Then press the “Advanced” pushbutton. Select the 19200 baud rate radio button.Press “OK.”
Note: Engines that do not have a service connector may also require the 140-9442 ATA\CDL T-Adapter.

How to program Honda Remote Keyless Entry

Honda keyless entry remote programming (called installation or activation) is do it yourself uncomplicated procedure. Despite of the widespread name – remote programming, the method involves training the automobile to recognize a newly purchased remote. Most late model Honda car remotes can be programmed this way.

2-1
PROGRAMMING INSTRUCTIONS – How to program a Honda Replacement key fobs, instructional video.
Please also watch the video on how to program the Honda remotes below

Easykeymaker Honda Key Programmer Cover all Honda/Acura equipped with OBDII-16 socket from 1999 to 2018. The device is for registering key by OBDII. Cover all Honda/Acura equipped with OBDII-16 socket from 1999 to 2018. Support both transponder key and smart key registration in the following scenarios:

NOTE: Point remote transmitter at door function control module (located in driver’s door).

Within 4 seconds: Press LOCK button or UNLOCK button of first remote transmitter.

Within 4 seconds: Switch ignition OFF.

Within 4 seconds: Switch ignition ON.

Repeat procedure above twice.

Within 4 seconds: Press LOCK button or UNLOCK button of first remote transmitter.

System should now lock and unlock vehicle to indicate remote programming mode activated.

Within 10 seconds:

Press LOCK button or UNLOCK button of first remote transmitter, allowing doors to lock and unlock once.

Press LOCK button or UNLOCK button of each remaining remote transmitter to be programmed, allowing doors to lock and unlock once as each remote transmitter is programmed.

Switch ignition OFF.

Remove key.

Check operation of all programmed remote transmitters

You can use this Car Key Programming method on the following Honda keyless entry remotes (controls, transmitters, door openers, clickers or however you want to call those)

1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 Honda Accord remote controls

2001 2002 2003 2004 2005 Honda Civic remote door locks control

2002 2003 2004 2005 2006 Honda CRV SUV remote keyless entry transmitters

2007 2008 Honda Fit remote entry

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Honda Odyssey keyless entry remotes

2003 2004 2005 2006 2007 2008 Honda Pilot remote entry key fobs

2006 2007 2008 2009 Honda Ridgeline remote keys

Honda Element remotes

2000 and up Honda 2000 remote keyless keyfobs

2000 2001 2002 2003 Honda Insight remotes

1996 1997 Honda Del Sol keyless entry remote controls

1999 2000 2001 Honda Prelude remotes