Month: May 2017

How to download and install the EZdiag APP

Download and Install the EZdiag App
Easydiag App available on the Apple App Store and Google Play Store.
2. Scan the QR Code to download the App

Due to the system restraints of Apple iOS, a new App will be required to install on the first time to open the diagnostic software. Please use the EZdiag App to perform vehicle diagnosis.

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This ICarScan Launch has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of Ihe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

Ksuite 2.08 download: fix Ktag sw 2.13 fw 6.070 internet connection

Here is a customer solution of KTAG Programming Tool Master sw: v2.13 hw: v6.070 internet connection. The solution here is aimed to solve all grey buttons in ktag interface.

Issues: all grey in ktag

The solution to solve…

1 install ksuit 2.08
2 download the file
3 the file have 3 parts (sd card, update too ksuit, nxp bin if necessary)
4 put the file update in the past off ksuit 2.08
5 use a new sd card ( in my case the old one doesn’t work )
6 copy the file to sd card
7 open ksuit the ksuit update auto

incl. KTag 6.070 update – KSUITE

KTag 6.070 update – NXP BIN

KTag 6.070 update – SD CARD

Ktag programmer i’m using:

Attention please!!!!!!!!
Tip 1: if works after install the ksuit that you want, if doesn’t work you have to re-flash the nxp the file is there for me was not necessary
Tip 2: doesn’t use the internet when the tool is connected
Tip 3: this information is not mine, is work off some search in forum and help off some users

Installation Notices for VAG COM 12.10.3

Installation Notices for VAG COM 12.10.3


VAG COM 12.10.3
Firmware Version: 1.96
Chip Edition: ATMEGA162 + FT232RL +L9637D + 16V8B
High quality original brand new IC production,  With the upgrade brush program interface
After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)

In the WIN10 system installedVAG COM 12.10.3before, you need to click on the system
Settings – Update & security – Windows Defender
And put inside the real-time protection off

When using VAG COM 12.10.3, you need to right-click the start icon, and then start the administrator mode

Important Notices for MB SD Connect C5 With DTS And Vediamo

Important Notices for MB SD Connect Compact 5 With DTS And Vediamo


2017.03 MB SD Connect Compact 5 With Super Engineering Software DTS Monaco And Vediamo Plus EVG7 Tablet Support Offline Program is the latest and best diagnostic tool and programming scanner for Benz. We will test the full set of this MB SD Connect Compact 5before ship and the buyer can get it work directly after they receive it. But sometimes they still have different problems. How to avoid these problems? Please check the following 4 notices:
1. Please do not connect with any network forever, otherwise the software will be damaged easily.
2. Please close all the anti-virus software and firewall before you run the software.
3. Please do not install any other software on this c5 hard disk, which will damage the c5 software too.
4. Please do not put any batteries in C5 tester even if you get the notice to do so, just ignore that put in batteries notice and go on your working without puting any batteries, otherwise C5 tester can be damaged easily.

Keep in mind for all these important notices for thisMB SD Connect Compact 5 with DTC and Vediamo Plus EVG7 Tabelt, then it will become your great assistant!

Cummins INLINE 6 Data Link Adapter Quick Start Guide

Cummins INLINE 6 Data Link Adapter Quick Start Guide


Cummins INLINE 6is the best special diagnostic tool for most cummins vehicles. The INLINE 6 is a highly reliable datalink adapter that can be used on a wide range of applications to communicate with vehicle systems via SAE J1708/J1587 and SAE J1939 protocols. Please note that the INLINE 6 is designed to be used with RP1210 compliant software.

Minimum System Requirements of Cummins INLINE 6Data Link Adapter
Microprocessor – Intel Pentium 500 MHz
Memory – 2 GB
CD Drive
Operating System – Windows 7, Vista, & XP SP3
INSITE 7.5.1 installed

How to Install the Cummins INLINE 6Software Driver
•Insert the INLINE 6 driver CD into your computer’s CD-ROM drive.
•Run INLINE6_Driver_Setup.exe
•If a Windows Explorer folder opens, select INLINE6_Driver_Setup.exe
Note that on some systems the autorun settings may be set to have the installation to just begin executing upon CD insertion.

WINDOWS XP – A message appear stating “The software you are installing has not passed Windows Logo…” Click “Continue Anyway”. Click “Finish” when installation is complete.

How to unblock KTAG fw v6.070 from the Internet

All paid off!! I have spent one week to manage to reset and make work the K-TAG ECU Programming firmware v6.070. I mean, i have unblocked KTAG machine from the Internet. And now, i would write this manual to help others.


I’m not responsible for your damage. All actions ON YOUR OWN RISKS.

Why to unblock ktag 6.070?

Because if your KTAG has been blocked from internet you will see customer code c5555.
How to unblock Ktag v6.070?
1)have to erase the lpc2478 (method heat and reset, using flashmagic with ttl com port.)
(you can search video in youtube lpc2478 unock)
2)have to program the processor, i have done with flash magic (not forget to remove the bridge) or you can program with J-link adapter.
use frmw.hex file.
3)has to erase you sd card and format it to fat32. (not load files here the software will do it.)
4)not your hardware is ready to be updated by software. copy envelope Ksuite to your c:/ and copy the envelope update to c:/ksuite/update.
(the update envelope has the data for your device to be updated)
5)not forget to disconnect internet and run 2 times the software to update and device and the families.

Possible problems and solutions when unblock KTAG:
1)the heat and reset function

How to turn off the red lamp so you can connect the flash magic:

usually reset 2 or 3 times you heat and wait the lamp to be turned off by the heat;

remove the heat gun and wait if the lamp 2-3 seconds with turn on;

if yes, do it again;

if not, try to connect;

if not connect, make reset and try again until you connect.
2)you may have serial l00000000 and fw 0 when erasing the processor.

If this happens, the the processor has short circuit a leg and the SD card cannot be ready it in fat32 system.
check the legs or clean them;
run the software and notice if you have a update serial;

ps. This is a user solution. All info here is just for sharing.

CnAutotool warning:

Do not connect your computer to internet when you use your Chinese KTAG ksuite master ecu tuning kit at, do not update the device in any way!

What ktag V2.11 FW V6.070 can do more?

KTAG v2.11 FW:6.070 is available in, engineer verified its working perfect like original one.

What KTAG Programming Tool Master V2.11 FW:6.070 can do more?
1.Add a renew button which help users away from the worries of hardware be locked using 30 times, you only need press the button to renew by yourself.
2.Works on new BMW F series!

3.Ktag V2.11 works on more ECU types I.E Bosch EDC 16/ EDC17/ MED17,  DCM 3.7, Denso ECU type, etc.