Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely as the solvent can damage the clips.
Step 1. Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. You can find the current mileage shown on the dashboard. As shown: the mileage of this car is 135,929km.
Step 2. Hook up Digiprog III digiprog 3 to the 2004 Audi A6 via ST14 adapter and its screen will light up as the car is providing power to it.
Step 3. Click on “PKW/LKW”:
Step 4. Go to Digiprog 3 main menu, select car maker, car model and the year of the model. Click the tick icon on the bottom left to continue:
Step 5. Input the number of mileage that you want and click the tick icon to go on.
Step 6. Wait for a few minutes and you will find the mileage on the dashboard is adjusted successfully.
Digiprog III is the worldwide leader in the production and marketing of digital speed programming and correction software. Digiprog 3 is easy to operate as Digiprog 3 device has the large screen display. Nowadays, digiprog 3 odometer correction tool has updated to digiprog 3 4.94 version.