autotool.biz

Month: July 2015

No Comments in Uncategorized

V4.88 digiprog 3 is newly release

Some customers told us that their Digiprog 3 Odometer correction tool would go blue screen of dead after they tried to upgrade it, and had to send their tool back to us for repair. We later found out that this is mainly caused by wrong upgrade operation. So we decide to write a Digiprog 3 update tutorial, hoping mechanics can update the tool smoothly.

V4.88 digiprog 3 is newly release, it is an upgraded version of Digiprog III V4.85. It adds more supported car models on the basic of V4.85. Digiprog3 V4.88 is a cost-effective mileage correction tool with high quality, and slso no need to worry about blue screen problem now.

I was thinking about buying a Digiprog3 clone from China I know that YANHUA Digiprog 3 is the best and the latest version is 4.94, but do not know where to buy. Also I was wondering should I buy 4.94 directly from the Chinese sellers, or buy a 4.88 and then buy the 4.94 update separately.

Two friendly prompt of Digiprog III

They confirmed that is was not the problem of the unit. They analyzed my five cars finding that are all made before 2006. They gave me two friendly prompt:

1 Before use V4.88 Digiprog III digiprog 3 (Digiprog3) Mileage Correction Tool, I should read carefully the manual in the CD and learn how to program mileage for my car. In this case, I have an idea what cable should I use.

2 If come across the error, first disconnect the unit and connect to my car again. The unit will guide me which cable should be used to carrying out mileage programming. When project mileage programming function, I’d better to disassemble dashboard and mileage chip.

I ordered a Digiprog III (Digiprog3) Odometer Correction Tool with the version V4.88 from a Chinese OBD2 vendor. When I programmed my VW Passat B5 2003 via OBD2 port, an error “No Connection” popped out in the screen of the unit. Then I tried it on BMW E36 1997, it failed either. Following I test more three cars VW Polo 2000, Peugeot 106 2001 and Nissan Micra 2003 C66, it still did not work. I wonder maybe I was knocked off by the dealer. I immediately connected the tech support from www.xcardiag.com/ by sending error pictures.

How to do Mileage correction by Digiprog 3 V4.94?

Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely as the solvent can damage the clips.

Step 1. Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. You can find the current mileage shown on the dashboard. As shown: the mileage of this car is 135,929km.
Step 2. Hook up Digiprog III digiprog 3 to the 2004 Audi A6 via ST14 adapter and its screen will light up as the car is providing power to it.
Step 3. Click on “PKW/LKW”:
Step 4. Go to Digiprog 3 main menu, select car maker, car model and the year of the model. Click the tick icon on the bottom left to continue:
Step 5. Input the number of mileage that you want and click the tick icon to go on.
Step 6. Wait for a few minutes and you will find the mileage on the dashboard is adjusted successfully.

Digiprog III is the worldwide leader in the production and marketing of digital speed programming and correction software. Digiprog 3 is easy to operate as Digiprog 3 device has the large screen display. Nowadays, digiprog 3 odometer correction tool has updated to digiprog 3 4.94 version.

Digiprog 3 4.88 is Digiprog iii odometer correction tool

Digiprog 3 4.88 is Digiprog 3 odometer correction tool. Need digiprog3 4.88 manual and digiprog china software? Below autonumen sharing Digiprog 3 4.88 manual Free download digiprog 3 odometer software.Following is a step-by-step instruction on Mercedes Benz W204 2009 mileage correction using Digiprog 3 odometer correction tool via OBD within 5 minutes without dissembling the dashboard.

I used to buy a Digiprog III digiprog 3 V4.94 entire package from Goobd2.com, it shows good work when doing odometer correction on VW and other vehicles. Last week, the ST01 cable was missed, I couldn’t wait to buy a new one, because there are a car need it urgently. So I asked whether there are replacement of ST01 in the entire package. Surprisingly, it does have. Then I use the cable and adapter with red round on the following picture to replace the ST01, and finish my work finally.

The Launch X431 PAD is ready to release

With a DBS connector and wireless Bluetooth technology, the Launch PAD doesn’t even have to be plugged directly into a car. Just pop in the connector and you’ll have instant, stable and lightening quick data in seconds thanks to the Large Pack Transfer (LPT) Technology.

With this machine you’ll have OE access to European, Asian and American sources so you can diagnose almost any car. Whether it’s system resets or module coding, this device allows you to do it all. We are truly grateful for your great concern and powerful help on KingDiag tech company all the way, and now we’d like to give you the notice that The Launch X431 PAD is ready to release.

The particular display involving a diagnosis launch x431 pad seemed to be delivered to the particular huge display wall structure. Separate belonging to the examination belonging to the performs and feature, the particular real-time examination seemed to be additionally introduced.

Five Reasons You Need the X431 Pad

The launch of the X431 PAD has been a great success for Launch UK, with garages up and down the country putting their orders in for the brand new device. But there are still a few people out there who are wondering why they need the Pad for their garage. Here, we’re going to tell you why. You Don’t Have to Plug It into the Car Directly
http://www.cnautotool.com/images/201503/goods_img/3084_P_1425973550778.jpg
Five Reasons You Need the X431 Pad
1.Unprecedented OE-Level Access
2.Quick Access in Any Situation
3.High Quality Touch Screen
4.Regular Software Updates
5.With a DBS connector and wireless Bluetooth technology

Within the The us, pretty some states now use OBD-II screening in lieu of checks in OBD-II compliant cars and trucks and extra new). Considering the fact that OBD-II stores challenges codes for emissions equipment, the checks laptop or computer process can question the vehicle’s X-431 PAD laptop or computer process and validate there will not be any emission joined challenges codes which the vehicle was in compliance with emission benchmarks for that products twelve months it unquestionably was built

X-431 PAD is the newest and first diagnostic products

Launch X431 diagnostic tool information including Launch scanner,Launch X431 Diagun, Launch X431 Master, Launch Crecorder, Launch Creader,X431 GDS,X431 Idiag,X431 PAD,X431.etc. Launch Tech USA has launched its lat-est scan tool, the X431 Launch Pad – which the com-pany says is the absolute fastest scan tool, from diag-nos-tics to repair, right at the vehi-cle. With this new scan tool come a free trial of Inden-ti-fix Direct-Hit and offers the lat-est in OBDII wire-less tech-nol-ogy.

Our latest diagnostic tool, the X431 PAD has taken the world by storm, with people from multiple countries appreciating the giant leap forward in diagnostic capabilities. With this interest there has been a wealth of videos being made, showcasing it’s features. So we’ve decided to bring together some of them so you can see for yourself what a fantastic tool the X431 Euro Pad is.

X-431 PAD is the newest and first diagnostic products together with the internet. Printer inside, equipped with a DBScar diagnosis connectors.Our online store www.autonumen.com just only offer you 1080USD. It is global version, you can update on Launch offical website.Its support multi-languages. Such as Support Languages: Chinese, Japanese, German, Italian, English, France, Russian, Portuguese, Turkish, spanish.

X-431 PAD is LAUNCH new generation diagnostic

http://www.cnautotool.com/images/201503/goods_img/3084_P_1425973550778.jpg
X-431 PAD is the newest and first diagnostic products together with the internet. Printer inside,  equipped with a DBScar diagnosis connectors. It Support 3 G/WIFI communication  and the Internet to diagnose.also is a specially designed diagnostic tool for automotive technicians. Compact main unit, powerful diagnostic functions, fast and convenient update,universal connectors, make it the first choice for technicians. Launch X431 PAD is the newest equipment for technicians.

X-431 PAD is LAUNCH new generation diagnostic options based mostly automotive methods tablet-style diagnostic scanners; Windows Embedded Standard7 working system; built-in printer, pluggable DBScar connector;

The Launch Pad, running on Windows 7, offers a true PC-Based Diagnostic Scan Tool experience that is both X431 PAD wireless to the car and the internet. Multiple applications can be run simultaneously and at blazing fast speeds. Bi-directional controls, module coding, and the latest in OE level coverage and capabilities for Asian, European and American car-lines – are right at your fingertips with the Launch Pad.

Luanch X431 PAD is very easy to operation

http://www.cnautotool.com/images/201503/goods_img/3084_P_1425973550778.jpg

Launch X-431 PAD is very easy to operation, printer inside, DBS cards connectors.  support 3G/Wifi communication. owerful diagnostic functions, fast and convenient update,universal connectors, make it the first choice for technicians.

X431 PAD Extended functions is VGA/HDMI projection, Oscilloscope, Engine ignition analysis, Sensor simulation and test, Multimeter, Battery test, endoscope.Color touch screen, Easy operation.Comprehensively mixed with modern day commuication engineering, the primary car networking application for high-end diagnostic products of LAUNCH

X431 PAD completely adapts on the key conmunication techniques for instance Wi-Fi, Bluetooth.LAUNCH has powerful research and growth capabilities on communication, and linked items (Diagun-Bluetooth, GDS-Wifi, etc.) have passed through the business inspection for 2-3 years.

What does the DA-Dongle J2534?

Unlike the myriad problems facing the Vag com 12.12 which already tell you about the new VAGCOM above 12.12 it is compatible with all versions of Windows. It is also compatible with all VAG vehicles (Seat, Skoda, Audi and Volkswagen) between 1995 and 2014, including the last VAG MQB platform. Seat Leon mk3, 8V Audi A3, Volkswagen Golf 7, Skoda Octavia mk3, etc ….

It incorporates all the features of the oldest VAGCOM, which you can make manual that explain soil. ADK auto diagnostic factory has 2 types of vagcom 12.12 interfaces, both are fit for vag group vehicles, can support multi-functions, and easy to use. What’s more, we have English, German and French version available.

The DA-Dongle J2534 is a low cost high-performance pass-thru (SAE J2534) vehicle interface. This unit connects directly to the vehicle OBDII (Diagnostic)connector; it then connects to any laptop via a USB 2.0 cable. Once the J2534 Driver files are loaded, this product will allow normal operation with OEM compliant J2534 diagnostic applications. This device supports CAN, FT CAN, and ISO protocols

What does the DA-Dongle J2534?
The DA-Dongle J2534 connects directly to the vehicle OBDII ( diagnostic ) connector and then to a laptop via a USB cable for use with IDS/SDD. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR IDS/SDD diagnostic tool. The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR IDS/SDD diagnostic application. Only SCP communication are not possible with this device. How does the DA-Dongle operate in J2534 mode?The DA-Dongle J2534 device is simple and easy to use.